NICHIA CORPORATION • Pb-free Reflow Soldering Application • ESD Withstand Voltage (HBM) Class 3B • RoHS Compliant

• This LED is only for general illumination use. However, do not use this LED for obstruction, emergency, medical, display, and machine vision applications, since these ones are not included in general illumination. * Characteristics at TJ=25°C and measured in pulse mode. * Optical Characteristics as per CIE 127:2007 standard. * Chromaticity Coordinates as per CIE 1931 Chromaticity Chart. * Rejs is measured using the Dynamic Mode detailed in JESD51-1. * ReJS is the thermal resistance from the junction to the Ts measurement point. (Test board: FR4 board thickness=1.6mm, copper layer thickness=0.07mm)...

Color Temperature Minor Axis Major Axis Ellipse Rotation Angle (Unit: K) Center Point Color Temperature Minor Axis Major Axis Ellipse Rotation Angle (Unit: K) Center Point Color Temperature Minor Axis Major Axis Ellipse Rotation Angle (Unit: K) Center Point Color Temperature Minor Axis Major Axis Ellipse Rotation Angle (Unit: K) Center Point

* Ranking at Tj=25°C and measured in pulse mode. * Forward Voltage Tolerance: ±0.05V * Luminous Flux Tolerance: ±5% * Color Rendering Index Ra Tolerance: ±1.5 * Color Rendering Index R9 Tolerance: ±3 * Chromaticity Coordinate Tolerance: ±0.003 * LEDs from the above ranks will be shipped. The rank combination ratio per shipment will be decided by Nichia. Definition of the MacAdam ellipse ranks:

CHROMATICITY DIAGRAM 0.34 黒体放射軌跡 Blackbody Locus 0.32 0.35

CHROMATICITY DIAGRAM 0.32 黒体放射軌跡 Blackbody Locus

* *Snnnl£RoHSft^|c^£LTfcy£-fo This product complies with RoHS Directive. The dimension(s) in parentheses are for reference purposes. Dimensions do not include mold flash. \ Protection Device

• Recommended Reflow Soldering Condition(Lead-free Solder) • Recommended Hand Soldering Condition ^ * This LED is designed to be reflow soldered to a PCB. If dip soldered, Nichia will not guarantee its reliability. * Reflow soldering must not be performed more than twice. Hand soldering must not be performed more than once. * When cooling the LEDs from the peak temperature a gradual cooling slope is recommended; do not cool the LEDs rapidly. * During reflow soldering, the heat and atmosphere in the reflow oven may cause the optical characteristics to degrade. In particular, reflow soldering performed...

NICHIA STS-DA1-7525 * If the top cover tape is removed right next to where the nozzle picks up the LEDs, regardless of whether the LEDs have been baked or not, it may cause the LED to be picked up incorrectly; it is recommended to remove the top cover tape further from where the nozzle picks up the LEDs. Ensure that there are no issues with the conditions when the nozzle picks up the LEDs. ● Recommended Tape Removal Position(Removing the cover tape further from the pick-and-place nozzle) 吸着ノズル Pick-and-place nozzle テープ剥離位置 Tape Removal Position 製品テープ Top Cover Tape キャリアテープ引き出し方向 Feed Direction...

TAPE AND REEL DIMENSIONS Cathode Mark テーピング部 Tape (0.02 クロスバー凹部) (0.02 Crossbar Recess) 3.18±0.1 エンボスキャリアテープ Embossed Carrier Tape トレーラ部/リーダ部 Trailer and Leader トップカバーテープ Top Cover Tape 引き出し方向 Feed Direction LED装着部 Loaded Pockets トレーラ部最小160mm（空部） Trailer 160mm MIN(Empty Pockets) 引き出し部最小100mm（空部） Leader with Top Cover Tape 100mm MIN(Empty Pocket) リーダ部最小400mm Leader without Top Cover Tape 400mm MIN

PACKAGING - TAPE & REEL Part No. Nxxxxxxx No. STS-DA7-17527 Reels are shipped with desiccants in heat-sealed moisture-proof bags. シリカゲルとともにリールをアルミ防湿袋に入れ、熱シールにより封をします。 Label ラベル Desiccants シリカゲル Seal 熱シール NIC HIA CORPORATION 491 OKA, KAMINAKA, ANAN, TOKUSHIMA, JAPAN Moisture-proof bags are packed in cardboard boxes with corrugated partitions. アルミ防湿袋を並べて入れ、ダンボールで仕切ります。 Label ラベル TriG ai n® Technol ogy NICHIA CORPORATION 491 OKA, KAMINAKA, ANAN, TOKUSHIMA, JAPAN * ******* is the customer part number. If not provided, it will not be indicated on the label. 客先型名を*******で示します。 客先型名が設定されていない場合は空白です。...

Lot Number is presented by using the following alphanumeric code. xxxx-Nichia's Product Number RRR-Ranking by Color Coordinates, Ranking by Luminous Flux, Ranking by Color Rendering Index

DERATING CHARACTERISTICS Part No. NF2x757x No. STS-DA7-16041B Solder Temperature(Cathode Side) vs Allowable Forward Current はんだ接合部温度(カソード側)-許容順電流特性 Ambient Temperature(°C) 周囲温度 Duty Ratio vs Allowable Forward Current デューティー比-許容順電流特性 Solder Temperature(Cathode Side)(°C) はんだ接合部温度(カソード側) Allowable Forward Current(mA) Allowable Forward Current(mA) 許容順電流 Allowable Forward Current(mA) 許容順電流

OPTICAL CHARACTERISTICS Part No. NF2W757H-V3H5 No. STS-DA7-21348 * All characteristics shown are for reference only and are not guaranteed. 本特性は参考です。 * The following graphs show the characteristics measured in pulse mode. パルス駆動により測定しています。 Spectrum 発光スペクトル Relative Emission Intensity(a.u.) (Normalized to peak spectral intensity) 相対発光強度(最大強度で正規化) Directivity 指向特性 Radiation Angle 放射角度

OPTICAL CHARACTERISTICS Part No. NF2W757H-V3H5 No. STS-DA7-21349 * All characteristics shown are for reference only and are not guaranteed. 本特性は参考です。 * The following graphs show the characteristics measured in pulse mode. パルス駆動により測定しています。 Spectrum 発光スペクトル Relative Emission Intensity(a.u.) (Normalized to peak spectral intensity) 相対発光強度(最大強度で正規化) Directivity 指向特性 Radiation Angle 放射角度

FORWARD CURRENT CHARACTERISTICS / TEMPERATURE CHARACTERISTICS Part No. NF2W757H-V3H5 No. STS-DA7-21350 * All characteristics shown are for reference only and are not guaranteed. 本特性は参考です。 * The following graphs show the characteristics measured in pulse mode. パルス駆動により測定しています。 Forward Voltage vs Forward Current 順電圧-順電流特性 Junction Temperature vs Forward Voltage ジャンクション温度-順電圧特性 Forward Current vs Relative Luminous Flux 順電流-相対光束特性 Junction Temperature(°C) ジャンクション温度 Junction Temperature vs Relative Luminous Flux ジャンクション温度-相対光束特性 Relative Luminous Flux(a.u.) (Normalized at TJ=25°C) 相対光束(TJ=25°Cで正規化)...