*mydirectindustry

Catalogs
NIC Components
NMC-AP Series

NMC-AP Series

1 / 9 PagesView full catalog

NMC-AP Series

Product catalog summary

Features:

Soft terminations and AEC-Q200 qualified.
Manufactured at ISO/TS 16949 certified facilities.
Available in surface mount case sizes: 0603, 0805, 1206, and 1210.
Utilizes X7R dielectric with voltage ratings up to 250VDC.

Specifications:

Capacitance range: 1000pF to 4.7µF.
Capacitance tolerance: ±5% (J), ±10% (K), ±20% (M).
Operating temperature range: -55°C to +125°C.
Temperature characteristics: ±15%.
Rated voltages: 6.3, 10, 16, 25, 50, 100, and 250 VDC.

Case Size Dimensions (mm):

0603: Length 1.6 ± 0.20, Width 0.80 ± 0.15, Thickness max. as per specifications.
0805: Length 2.0 ± 0.30, Width 1.25 ± 0.20.
1206: Length 3.2 ± 0.40, Width 1.6 ± 0.20.
1210: Length 3.2 ± 0.50, Width 2.5 ± 0.30.

Part Number System:

Includes series, size code, temperature characteristic, capacitance code, tolerance code, voltage, packaging, and qualification details.

AEC-Q200 Stress Test Qualification:

High Temperature Exposure: 150°C for 1,000 hours.
Temperature Cycling: Minimum to maximum temperature for 1,000 cycles.
Moisture Resistance: 25~65°C, 90% RH, 10 cycles.
Biased Humidity: 85°C, 85% RH, rated voltage for 1,000 hours.
Mechanical Shock: 1,500G, 15.4ft/s, half sine, total 18 times.
Vibration: 10~2,000Hz, 5G's for 20 minutes, total 36 cycles.

Part Numbers and Specifications:

Detailed specifications for various part numbers including case size, voltage, capacitance, tolerance, dissipation factor, insulation resistance, dielectric withstanding voltage, and maximum thickness.

Overview: This document provides technical specifications and guidelines for the NMC-AP Series Automotive Grade Ceramic Chip Capacitors by NIC Components Corp. It includes detailed specifications, reflow soldering profiles, and packaging information.

Specifications: The document lists various models of capacitors with their respective dimensions, capacitance values, voltage ratings, and other electrical characteristics. For example, the NMC-AP1206X7R104K250EQYF model has a capacitance of 0.1 µF, a voltage rating of 250V, and a tolerance of 10%.

Reflow Soldering Profile: The recommended reflow soldering profile includes a peak temperature of +260°C for a maximum of 10 seconds. The preheat time is between 60 to 120 seconds, and the heating time is between 60 to 150 seconds.

Reel Quantities & Carrier Type: The document specifies the reel sizes and quantities for different case sizes (0603, 0805, 1206, 1210). For instance, a 7" reel can hold 4K punched components for 0603 and 0805 sizes, while a 13" reel can hold 15K punched components.

Carrier Tape Dimensions: Dimensions for punched and embossed carrier tapes are provided, detailing the width, pitch, and other relevant measurements for different component sizes.

Reel Dimensions: The document outlines the dimensions for 7" and 13" reels, including the diameter and maximum thickness.

Packaging Material: Components with a thickness greater than 1mm are taped on embossed plastic carriers, while those less than 1mm are taped on paper carriers.

Note: Specifications are subject to change, and users are advised to verify details with NIC Components Corp.

Catalog excerpts

FEATURES • SOFT TERMINATIONS & AEC-Q200 QUALIFIED • MANUFACTURED AT ISO/TS 16949 PRODUCTION FACILITY • SURFACE MOUNT CASE SIZES 0603, 0805, 1206 & 1210 • X7R DIELECTRIC • VOLTAGE RATINGS TO 250VDC *— Q = AEC-Q200 qualification Packaging: C = 7" paper, D = 13" paper E = 7" plastic, F = 13" plastic I— Voltage (Vdc) I— Capacitance Tolerance Code (see chart) 1— Capacitance Code, expressed in pF, first 2 digits are significant, 3rd digit is no. of zeros, “R” indicates decimal for under 10pF I— Temperature Characteristic I— Size Code (see chart) I— P = Denotes soft terminations 1— Series "Y" denotes suitable for automotive equipment, sourced to special i production and inspection at IATF-16949 certified production site i NMC-AP Series Note: Reflow soldering allowed for all case sizes. Contact NIC for wave soldering restrictions. PART NUMBER SYSTEM NMC-A P 0805 X7R 103 K 25 C Q Y F T— RoHS Compliant www.niccomp.com SPECIFICATIONS ARE SUBJECT TO CHANGE lie_NIC COMP

Open the catalog to page 1

NMC-AP Series Automotive Grade Ceramic Chip CapacitorsAutomotive Electronics Council Component Technical Committee AEC-Q200 - STRESS TEST QUALIFICATION FOR PASSIVE COMPONENTS GRADE: 1 TEMPERATURE RANGE: -40°C ~ +125°C PASSIVE COMPONENT TYPE: Capacitors, Ceramic Type (MLCCs) www.niccomp.com SPECIFICATIONS ARE SUBJECT TO CHANGE lie_NIC COMPONENTS CORP.

Open the catalog to page 2

NMC-AP Series Automotive Grade Ceramic Chip CapacitorsX7R PART NUMBERS AND SPECIFICATIONS Part Number (CONSULT FACTORY VALUES CONTINUE ON NEXT PAGE FOR CAPACITANCE VALUES NOT LISTED) SPECIFICATIONS ARE SUBJECT TO CHANGE

Open the catalog to page 3

Open the catalog to page 4

NMC-AP Series Automotive Grade Ceramic Chip CapacitorsX7R PART NUMBERS AND SPECIFICATIONS Part Number NIC COMPONENTS CORP. www.niccomp.com SPECIFICATIONS ARE SUBJECT TO CHANGE 5

Open the catalog to page 5

NMC-AP Series Automotive Grade Ceramic Chip CapacitorsX7R PART NUMBERS AND SPECIFICATIONS Part Number NIC COMPONENTS CORP. www.niccomp.com SPECIFICATIONS ARE SUBJECT TO CHANGE 6

Open the catalog to page 6

NMC-AP Series Automotive Grade Ceramic Chip CapacitorsX7R PART NUMBERS AND SPECIFICATIONS Part Number (CONSULT FACTORY FOR CAPACITANCE VALUES NOT LISTED) SPECIFICATIONS ARE SUBJECT TO CHANGE

Open the catalog to page 7

Automotive Grade Ceramic Chip Capacitors NMC-AP Series Reflow Soldering Profile Peak +260°C +0/-5°C for 10 sec. max. Temp. Rise Gradual Cooling REEL QUANTITIES & CARRIER TYPE Reel Size 7" 13" PUNCHED CARRIER TAPE DIMENSIONS (mm) Type Component Pitch SPECIFICATIONS ARE SUBJECT TO CHANGE

Open the catalog to page 8

NMC-AP Series Automotive Grade Ceramic Chip CapacitorsEMBOSSED PLASTIC CARRIER TAPE DIMENSIONS (mm) Type 0805/1206/1210 CASE SIZE REEL B REEL DIMENSIONS (mm) Reel Diameter (A) CARRIER TAPE MATERIAL Parts with a thickness of >1mm will be taped on embossed plastic carrier. Parts with a thickness of less then 1mm will be taped on paper carrier www.niccomp.com SPECIFICATIONS ARE SUBJECT TO CHANGE lie_NIC COMPONENTS CORP.

Open the catalog to page 9

NMC-AP Series

NMC-AP Series

Catalog excerpts

All NIC Components catalogs and technical brochures

Archived catalogs