Ceramic and Film Capacitors Catalog
93Pages

CLASS I DIELECTRIC, TEMPERATURE COMPENSATING RoHSCompliant > HIGH STABILITY OVER TIME, VOLTAGE AND TEMPERATURE CHANGES > includes all homogeneous materials LOW DIELECTRIC LOSS > *See Part Number System for Details NICKEL BARRIER TERMINATIONS AND EXCELLENT MECHANICAL STRENGTH SPECIFICATIONS NPO FEATURES > Capacitance Range0.47pF to 0.068 FCapacitance ToleranceBelow 10pF: 0.1pF(B), ѱ 0.25pF(C), 0.5pF(D)10pF and above: ѱ1%(F), 2%(G), ѱ5% (J)Operating Temperature Range-55C ~ +125аCTemperature Characteristics0 30ppm/ѰCRated Voltages25Vdc, 35Vdc, 50Vdc (see NMC-H Series for higher...

FEATURES CLASS II DIELECTRIC, TEMPERATURE STABLE Օ EXCELLENT FREQUENCY CHARACTERISTICS, NON-LINEAR CAPACITANCE CHANGE HIGHER CAPACITANCE THAN NPO Օ NICKEL BARRIER TERMINATIONS AND EXCELLENT MECHANICAL STRENGTH RoHSCompliant > includes all homogeneous materials *See Part Number System for Details Capacitance Range470pF ~ 0.82 F (see high CV datasheet for higher capacitance values)Capacitance Tolerance5% (J), ѱ10% (K), 20% (M)Operating Temperature Range-55ѰC ~ +125CTemperature Characteristicsб15% max. over temperature range (with 0 Vdc applied)Rated Voltages16Vdc, 25Vdc, 35Vdc, 50Vdc (see...

FEATURES CLASS II DIELECTRIC, TEMPERATURE STABLE Օ EXCELLENT FREQUENCY CHARACTERISTICS, NON-LINEAR CAPACITANCE CHANGE NICKEL BARRIER TERMINATIONS AND EXCELLENT MECHANICAL STRENGTH RoHSCompliant > includes all homogeneous materials *See Part Number System for Details CHARACTERISTICS > Capacitance Range0.0012 F ~ 0.82 F (see high CV datasheet for higher capacitance values)Capacitance Toleranceձ10% (K), 20% (M)Operating Temperature Range-55ѰC ~ +85CTemperature Characteristicsб15% max. over temperature range (with 0 Vdc applied)Rated Voltages6.3Vdc, 16Vdc & 25Vdc (see NMC-H Series for higher...

FEATURES HIGH K DIELECTRIC Օ HIGH CAPACITANCE DENSITY EXCELLENT MECHANICAL STRENGTH Օ NICKEL BARRIER TERMINATIONS RoHSCompliant > includes all homogeneous materials *See Part Number System for Details Capacitance Range0.01 F ~ 0.82 F (see high CV datasheet for higher capacitance values)Capacitance Tolerance+80%/-20% (Z)Operating Temperature Range-30C ~ +85аCTemperature Characteristics+22%, -82% max. capacitance over temperature rangeRated Voltages6.3Vdc, 16Vdc, 25Vdc, 50Vdc & 100Vdc(see NMC-H Series for higher voltages)Dissipation Factor(See Values Table)insulation Resistance10Gigohms min....

includes all homogeneous materials *See Part Number System for Details NMC-HC rev. 002 Temperature Coeffi cientX7RX5RY5VCapacitance Range1.0 F ~ 22 F1.0 F ~ 100 F1.0 F ~ 100 FCapacitance Tolerance10% (K) & 20% (M)10% (K) & 20% (M)+80%/-20% (Z)Operating Temperature Range-55հC ~ +125C-55аC ~ +85C-30аC ~ +85CTemperature Characteristicsб15% Cap.15% Cap.+22%, -82% Cap.Rated Voltages4Vdc, 6.3Vdc, 16Vdc, 25Vdc, 50Vdc & 100VdcDissipation FactorSee Sizes & Values Tablesinsulation Resistance100Megohm/ F minimum @ +25ѰCDielectric Withstanding Voltage250% of Rated Voltage for 5 1 sec., 50mA max. 150%...

F) RoHS COMPLIANT Օ SAC SOLDER COMPATIBLE** > FEATURES CRACK RESISTANT TERMINATION Օ SOFT TERMINATION, OPEN MODE FAILURE WIDE VOLTAGE RANGE (16V TO 5KV) Օ HIGH CAPACITANCE (UP TO 10 RoHSCompliant > includes all homogeneous materials *See Part Number System for Details *Test Frequency & Voltage: Up to 100pF 1MHz/1.0Vrms, Above 100pF 1KHz/1.0Vrms Temperature Coeffi cientNPOX7RCapacitance Range2.2pF ~ 0.22 F180pF ~ 10 FCapacitance ToleranceFor 2.2pF ~ 10pF: 0.1pF (B), ѱ0.25pF (C), 0.5pF (D), ѱ1pF (F)Above 10pF: 1% (F), ѱ2% (G), 5% (J), ѱ10% (K)10% (K) & ѱ20% (M)Operating Temperature Range-55C...

includes all homogeneous materials *See Part Number System for Details EIA Case Size04020603Length (L)1.0 ѱ0.051.6 0.15Width (W)0.5 ѱ 0.050.8 0.15Thickness (T)0.6 max.1.0 max.Termination Width (P)0.10 ~ 0.300.25 ~ 0.60 WH RoHS Compliant Tape & Reel (Paper carrier) Voltage (Vdc) Capacitance Tolerance Code (see chart) Capacitance Code, expressed in pF, fi rst 2 digits are signifi cant, 3rd digit is no. of zeros, ѓR indicates decimal for under 10pF Temperature Characteristic Size Code (see chart) Series Ԯ 22 NIC COMPONENTS CORP. www .niccomp. com www .lowESR. com www .RFpassives. com www...

includes all homogeneous materials *See Part Number System for Details SPECIFICATIONSNPOX7ROperating Temperature Range-55C ~ +125аC-55C ~ +125аCTemperature Characteristic30ppmѱ15%Dissipation Factor< 0.1%< 2.5%Insulation Resistance > 500Meg or 500Meg - F whichever is lessTest Method: Voltage rating < 500V measured after 1 minute at rated voltage, Voltage rating > 500V measured after 1 minute at 500VCapacitance Range0.22pF ~ 0.0056 F150pF ~ 0.47 FCapacitance Tolerance0.1pF(B), ѱ0.25pF(C), 0.5pF(D)ѱ1%(F), 2%(G), ѱ5%(J), 10%(K), ѱ20(M)5%(J), ѱ10%(K), 20(M)Rated Voltage250Vdc ~ 3KVdcDielectric...

includes all homogeneous materials *See Part Number System for Details SPECIFICATIONSNPOX7ROperating Temperature Range-55հC ~ +125C-55аC ~ +125CTemperature CharacteristicsC<10pF б150ppmC> 10pF 30ppmѱ15% with 0 VDC AppliedDissipation Factor0.3% max. @ 1MHz for <1000pF0.1% max. @ 1KHz for > 1000pF2.5% max. @ 1KHz1.0Vrms and 25ѰCInsulation Resistance100,000Meg min. or1,000Meg or500Meg / F whichever is less(+25C after 1 minute at 500VDC)100,000Meg / F whichever is less(+25аC after 1 minute at 500VDC)Capacitance Range5pF ~ 330pF150pF ~ 1,500pFCapacitance Tolerance5% (J)ѱ10% (K)10% (K)Rated...

includes all homogeneous materials

RoHS compliant Tape & Reel (Paper carrier) Voltage (Vdc) Capacitance Tolerance Code (see chart) Capacitance Code, expressed in pF, fi rst 2 digits are signifi cant, 3rd digit is no. of zeros, RӔ indicates ecimal for under 10pF Temperature Characteristic Size Code (see chart) Series A B FGKP P 1 P 2 TWSee note 13.50 0.051.75 ѱ0.12.50 max.4.0 0.14.0 ѱ0.12.0 0.050.6 max.8.0 ѱ0.3Note 1 - These dimensions are deterined by the maximum dimensions of the part. Clearance between the sides of the components shall be 0.05mm (min.) and 0.50mm (max). The clearance shall not allow the component to rotate...