*mydirectindustry

Catalogs
NIBCO
T-585-70-66-HC

T-585-70-66-HC

Product catalog summary

Overview: This document provides technical specifications for NIBCO's bronze ball valves, specifically models T-585-70-66-HC and S-585-70-66-HC. These valves are designed for plumbing applications with a focus on durability and performance.

Specifications:

Valve Type: Two-piece body, full port, stainless trim with a 3/4" hose connection, cap, and chain.
Pressure Rating: 600 PSI/41.4 Bar non-shock cold working pressure.
Conformance: Meets MSS SP-110 standards.

Dimensions and Weights:

Sizes available: 1/2 inch and 3/4 inch.
Dimensions vary slightly between models, with specific measurements provided for each size.
Weight: Ranges from 0.36 kg to 0.66 kg depending on size and model.

Material List:

Handle Nut: Stainless Steel 300 Series.
Handle: Zinc Plated Steel with Plastisol Coating.
Threaded Pack Gland: Brass ASTM B 16 Alloy C36000.
Packing and Thrust Washer: Reinforced PTFE.
Stem and Ball: Stainless Steel ASTM A 276 Type 316 or ASTM A 351 Type CF8M.
Body: Bronze ASTM B 584 Alloy C84400.
Hose Body End: ASTM B 124 Alloy C37700.
Cap: Die Cast Brass (for hose end thread protection only).
Gasket: Rubber.
Chain: Brass.

Installation Notes:

Solder end designed for soft-soldering with solders not exceeding 500°F to avoid damage to seat material.
Refer to the installation sheet packaged with valves for detailed instructions.

Additional Information:

For detailed operating pressure, refer to the Pressure Temperature Chart on page 41.

Catalog excerpts

Bronze Ball Valves Two-Piece Body • Full Port • Stainless Trim • ³⁄₄" Hose Connection with Cap and Chain • Blowout-Proof Stem 600 PSI/41.4 Bar Non-Shock Cold Working Pressureu 1. Handle Nut 2. Handle 3. Threaded Pack Gland 4. Packing 5. Thrust Washer 6. Stem 7. Ball 8. Seat Ring (2) 9. Body 10. Hose Body End 11. 1Cap 12. Gasket 13. Chain Stainless Steel 300 Series Zinc Plated Steel Clear Chromate Plastisol Coated Brass ASTM B 16 Alloy C36000 PTFE Reinforced PTFE Stainless Steel ASTM A 276 Type 316 Stainless Steel ASTM A 276 Type 316 or ASTM A 351 Type CF8M Reinforced PTFE Bronze ASTM B 584 Alloy C84400 ASTM B 124 Alloy C37700 Die Cast Brass Rubber Brass is for hose end thread protection only. Not to be used for pressure containing purposes. DIMENSIONS—WEIGHTS—QUANTITIES Dimensions T-585-70-66-HC S-585-70-66-HC T-585-70-66-HC S-585-70-66-HC Size A A B C C D T-585-70-66-HC S-585-70-66-HC Master In. mm. In. mm. In. mm. In. mm. In. mm. In. mm. In. mm. Lbs. Kg. Lbs. Kg. Ctn. Qty. ¹⁄₂ 15 2.84 72 2.90 74 1.88 48 5.19 132 5.25 133 .50 13 .80 .36 .74 .34 100 ³⁄₄ 20 3.31 84 3.47 88 2.25 57 6.25 159 6.25 159 .75 19 1.46 .66 1.42 .65 50 Note: Solder end is designed to be soft-soldered into lines using solders with the melting point not exceeding 500°F. Higher temperature solders will damage the seat material. See installation sheet packaged with valves. uFor detailed Operating Pressure, refer to Pressure Temperature Chart on page 41. NIBCO INC. WORLD HEADQUARTERS • 1516 MIDDLEBURY ST. • ELKHART, IN 46516-4740 • USA • PH: 1.800.234.0227 TECH SERVICES PH: 1.888.446.4226 • FAX: 1.888.336.4226 • INTERNATIONAL OFFICE PH: +1.574.295.3327 • FAX: +1.574.295.3455 www.nibco.com

Open the catalog to page 1

T-585-70-66-HC

T-585-70-66-HC

Catalog excerpts

All NIBCO catalogs and technical brochures