Specialty Valve Products Catalog
32Pages

Business-to-Business Solutions Look to NIBCO for technology leadership. The velocity with which e-business evolves demands that new products and services be continuously developed and introduced to keep our customers at the center of our business efforts. NIBCO provides an entire suite of business-to-business solutions that is changing the way we interact with customers. NIBCOpartner.comsm is an exclusive set of secure web applications that allow quick access to customer-specific information and online order processing. This self-service approach gives you 24/7 access to your order status...

Visit our website for the most current information. Consult the NIBCO® Lead Free Valves Catalog for the following products: • Lead-Free* PRO-Stop® Supply Stops • Lead-Free* Ball Valves • Lead-Free* Stop & Waste Valves *Weighted average lead content ≤ 0.25% NIBCO INC. WORLD HEADQUARTERS • 1516 MIDDLEBURY ST. • ELKHART, IN 46516-4740 • USA • PH: 1.800.234.0227 TECH SERVICES PH: 1.888.446.4226 • FAX: 1.888.336.4226 • INTERNATIONAL OFFICE PH: +1.574.295.3327 • FAX: +1.574.295.3455 www.nibco.com

AHEAD OF THE FLOW® Revised 4/29/2015 Brass Ball Valves Two-Piece Body • Standard Port • Blowout-Proof Stem • PTFE Seats 400 PSI/28 Bar Non-Shock Cold Working Pressure MATERIAL LIST Brass, Chrome Plated Steel, Plated Stainless Steel Stainless Steel Note: 1 For Material Certification, contact NIBCO Technical Services. Note: S-580-A series to be soft soldered into lines using solder with the melting point not exceeding 470° F. Use of higher temperature solders may damage the seat material. NOT FOR USE WITH POTABLE DRINKING WATER APPLICATIONS AFTER JANUARY 3,2014. NIBCO INC. WORLD HEADQUARTERS...

Brass Ball Valves Two-Piece Body • Full Port • Blowout-Proof Stem • PTFE Seats ¹⁄₄"-2" 600 PSI/41.4 Bar Non-Shock Cold Working Pressure 2¹⁄₂"-4" 400 PSI/27.6 Bar Non-Shock Cold Working Pressure CSA CERTIFIED TO ASME B16.44 AND CR91-002 (THREADED Z\v"-4") • UL LISTED (THREADED Z\v"-4") • FM APPROVED (THREADED Z\v"-2") Threaded CSA (Z\v" - 4"): • CR91-002: ¹⁄₂ psig, 2 psig, and 5 psig (these are specific approved categories) • ASME B13.44: 125 psig (maximum) • Temperature is -4° F to 194° F UL, Gas and Oil (Z\v" - 4"): • YQNZ, Compressed Gas Shutoff Valves: 250 psi • YRBX, Flammable Liquid...

Brass Ball Valves Two-Piece Body • Full Port • Blowout-Proof Stem • PTFE Seats • w/ Drain 600 PSI/41.4 Bar Non-Shock Cold Working Pressure MATERIAL LIST PART 1. Body 2. End Cap 3. Ball Seat 4. Ball 5. Stem 6. Stem Packing 7. Packing Nut 8. Lever Handle 9. Handle Nut 10. Drainable Cap 11. Rubber Seat Forged Brass1 CU > 57% Forged Brass1 CU > 57% PTFE Brass, Chrome Plated Brass PTFE Brass Steel, Plated Stainless Steel Brass Silicone Note: 1 For Material Certification, contact NIBCO Technical Services. NOT FOR USE WITH POTABLE DRINKING WATER APPLICATIONS AFTER JANUARY 3, 2014. NIBCO INC....

Gas Ball Valve GB10/GB1A Female x Female, Lever Handle • CSA Certified to Z\x PSI for indoor appliance connections per ANSI Z21.15/CSA 9.1 • 5 PSI for indoor shutoff per CGA CR91-002 and ASME B16.44 • 600 PSI CWP Rated SPECIFICATION Forged Brass1 CU>57% Forged Brass1 CU>57% PTFE, Glass Reinforced Brass, Chrome Plated Brass Nitrile Aluminum, Painted Red Steel, Plated Aluminum 1. Body 2. End Piece 3. Seat 4. Ball 5. Stem 6. O-Ring 7. Handle 8. Nut 9. ID Plate Note: 1 For Material Certification, contact NIBCO Technical Services. NOT FOR USE WITH POTABLE DRINKING WATER APPLICATIONS AFTER...

Gas Ball Valve GBV38M/GBVA12M — Flare x MPT, Lever Handle • CSA Certified to Z\x PSI for indoor appliance connections per ANSI Z21.15/CSA 9.1 • 5 PSI for indoor shut-off per ASME B16.44 and CGA CR91-002 MATERIAL LIST PART 1. Body 2. End Piece 3. Seat 4. Ball 5. Stem 6. O-Ring 7. Handle 8. Nut 9. ID Plate Forged Brass1 CU>57% Forged Brass1 CU>57% PTFE, Glass Reinforced Brass, Chrome Plated Brass Nitrile Aluminum, Painted Red Steel, Plated Aluminum NOT FOR USE WITH POTABLE DRINKING WATER APPLICATIONS AFTER JANUARY 3, 2014. GBVA — Flare x FPT, Lever Handle • CSA Certified to Z\x PSI for indoor...

Quarter-Turn Boiler Drains 125 lb. CWP to 100°F Maximum Temperature 180°F QUARTER-TURN BOILER DRAINS MATERIAL LIST PART Screw Steel I.D. Tag Aluminum Handle Zinc Stem Brass ASTM B 16 UNS C36000 O-Ring Nitrile Seat PTFE Ball Brass ASTM B 16 UNS C36000 Adapter Brass ASTM B 283 UNS C37700 Body Brass ASTM B 283 UNS C37700 QT73X DESCRIPTION BOILER DRAIN FIP to Hose IAPMO Listed to cUPC® DESCRIPTION BOILER DRAIN Cup or MIP Threads to Hose IAPMO Listed to cUPC® * C\v" furnished in male threads only NOT FOR USE WITH POTABLE DRINKING WATER APPLICATIONS AFTER JANUARY 3, 2014. NIBCO INC....

Multi-Turn Boiler Drains 125 lb. CWP to 100°F Maximum Temperature 180°F MULTI-TURN MATERIALS LIST PART Body Bonnet Stem Seat Disc Seat Disc Screw Packing Nut Packing Handwheel Handwheel Screw Cast Copper - Based Alloy C84400 Cast Copper - Based Alloy C84400 Cold-formed Copper Alloy Buna-N Stainless Steel, Type 410 Free Cutting Brass - ASTM B 16 Graphite Impregnated, Asbestos-Free Epoxy Coated Zinc Alloy Carbon Steel - Clear Chromate Finish 74-CL DESCRIPTION Boiler Drain Copper or Male Threads to Hose APPROX. DIMENSIONS NET WT. B 3 ZZ\zn" .4 lb IAPMO Listed to cUPC® * C\v" furnished in male...

Hose Bibbs 125 lb. CWP to 100°F Maximum Temperature 180°F QUARTER TURN HOSE BIBBS MATERIALS LIST PART Screw I.D. Tag Handle Stem O-Ring Seat Ball Adapter Body Steel Aluminum Zinc Brass ASTM B 16 UNS C36000 Nitrile PTFE Brass ASTM B 16 UNS C36000 Brass ASTM B 283 UNS C37700 Brass ASTM B 283 UNS C37700 DESCRIPTION NO-KINK HOSE BIB Male or Cup to Hose HOSE BIBB DESCRIPTION Cup or Male to Hose Male Thread to Hose IAPMO Listed to cUPC® IAPMO Listed to cUPC® DESCRIPTION NO-KINK HOSE BIBB FIP to Hose IAPMO Listed to cUPC® DESCRIPTION NO-KINK HOSE BIBB Z\x Cup or C\v Ftg. to Hose IAPMO Listed to...