www.nibco.com A H E A D   O F   T H E   F L O W® Revised 8/7/2012 NIBCO® Press System® Brass Ball Valves Two-Piece Body • Full Port • Brass Trim • Blowout-Proof Stem • PTFE Seats 200 PSI/41.4 Bar Non-Shock Cold Working Pressure 250°F Maximum Operating Temperature CONFORMS TO MSS SP-110 MATERIAL LIST Part 1. 2. 3. 4. 5. 6. 7. Specification Handle Handle Nut Pack Gland Packing, Stem Flat Washer O-Ring (Stem Seal) Thrust Washer 1/2" - 1" 8. Stem 11/4" - 2" 9. Body 10. Seat Ring (2) 11. Ball 1/2" - 3/4" 1" - 2" 12. Body End Piece 13. Female Adapter (2) 14. O-Ring (2) Plated Steel with Plastisol Cover Plated Steel Brass ASTM B16 Alloy C36000 Virgin PTFE 430 Stainless Fluorocarbon (FKM) Reinforced PTFE Brass ASTM B16 Alloy C36000 Silicon Bronze ASTM B371 Alloy 69400 or 69430 Forged Brass ASTM B283 Alloy C37700 Virgin PTFE Brass ASTM B16 Alloy C36000 (Chrome/Nickel Plated) Forged Brass ASTM B124 Alloy C37700 (Chrome/Nickel Plated) Forged Brass ASTM B283 Alloy C37700 Bronze ASTM B61 Alloy C92200 EPDM PFFP600 Press x Press Female End DIMENSIONS—WEIGHTS imensions D Size A B C D Weight In. mm. In. mm. In. mm. In. mm. In. mm. Lbs. Kg. ¹⁄₂ 15 2.37 60 3.90 99 1.95 50 0.50 13 .54 1.19 ³⁄₄ 20 3.18 81 4.66 118 2.30 58 0.75 19 1.16 2.55 1 25 3.84 98 4.66 118 2.50 64 1.00 25 1.61 3.54 1 ¹⁄₄ 32 4.34 110 6.69 170 3.05 78 1.25 32 2.63 5.79 1 ¹⁄₂ 40 4.88 124 6.69 170 3.23 82 1.50 38 3.69 8.12 2 50 6.04 153 6.69 170 3.55 90 2.00 51 5.76 12.68 ® NIBCO Press System® ball valves are designed to meet MSS SP-110 with the exception of the end connection. Ball valves are down-rated from 600 PSI CWP to 200 PSI CWP to match the Press System®. Male and female press-to-connect ends are new technology not yet covered in the current edition of this specification. PFFP600 PxP 22 NIBCO INC. WORLD HEADQUARTERS • 1516 MIDDLEBURY ST. • ELKHART, IN 46516-4740 • USA • PH: 1.800.234.0227 TECH SERVICES PH: 1.888.446.4226 • FAX: 1.888.234.0557 • INTERNATIONAL OFFICE PH: +1.574.295.3327 • FAX: +1.574.295.3455 www.nibco.com