Lead Free lead free valves *Weighted average lead content ≤ 0.25%

the lead free authority ytirohtua eerf dael eht ytirohtua eerf dael eht Wrot Copper & Cast Performance Bronze™ • Sweat and thread • Size range: 1/8” to 8” NIBCO® Press System® • Wrot copper and cast Performance Bronze • Size range: ½” to 4” NIBCO® Push • Brass fittings and valves • Size range: ½” to 1” Flanges • 1-piece cast Performance Bronze - Size range: 1” to 6” • 2-piece copper - Size range: ¾” to 6” NIBCO® PEX Piping Systems • Performance Bronze fittings and valves • Size range: ½” to 1” CPVC-CTS Fittings • Suitable for hot and cold water distribution • Size range: ½” to 1” The largest...

www.nibco.com AHEAD OF THE FLOW Table of Contents COMMERCIAL VALVES PLUMBING VALVES Visit our website for the most current information. HydraPure® Performance Bronze™ Commercial Valves Figure Number Key for Threaded, Solder and Press Ends Figure Number Key Valve Style PC - Press 111 - Rising Stem Gate S - Solder 113 - Non-rising Stem Gate T - Thread TPC - Thread x Press 413 - Swing Check 480 - Ring Check 580 - Two-piece Cast Conventional Port Ball 585 - Two-piece Cast Full Port Ball 595 - Three-piece Cast Full Port Ball 685 - Two-piece Forged Full Port Ball Trim Material Lead-Free* Designation...

TURN TO EXPERIENCE ECNEIREPXE OT NRUT ECNEIREPXE OT NRUT For over two decades, NIBCO has led the industry in the development of lead-free alloys and commercialization of lead-free plumbing products. NIBCO first introduced a lead-free alloy into the domestic plumbing market in 1992. INDUSTRY-WIDE CHALLENGE Reduce the allowable lead content in the Safe Drinking Water Act and other equivalent state regulations from 8% to .25% maximum by weighted average. NIBCO SOLUTION NIBCO developed a line of valves produced from Performance Bronze™ lead-free alloys, a family of high-quality, time-proven silicon...

WHY SILICON LEAD FREE ALLOYS? BASIC PHYSICAL PROPERTIES HydraPure® silicon Performance Bronze™ exhibits mechanical properties that far exceed traditional plumbing alloys containing lead, especially when temperature is applied. NIBCO provides a series of white papers detailing engineering properties and performance characteristics of lead-free products on its website, nibcoleadfree.com. CORROSION RESISTANCE Silicon improves corrosion resistance of copper alloys, creating a largely impenetrable surface oxide barrier to corrosion attack. NIBCO uses third-party agencies to test its HydraPure® silicon...

www.nibco.com AHEAD OF THE FLOW Lead-Free* Commercial Valves Illustrated Index T/S-585-80/66-LF Two-Piece Lead Free Ball Valve Full Port, 600 PSI CWP Threaded or Solder Ends Sizes 1/4” thru 2” Page 8, 9 Two-Piece Lead Free Ball Valve Full Port, 250 PSI CWP Copper Press Ends Sizes 1/2” thru 2” Page 10, 11 Lead Free Ball Valve Full Port, 250 PSI CWP Threaded x Press Ends Sizes 1/2” thru 2” Page 12, 13 Two-Piece Lead Free Ball Valve Conventional Port, 600 PSI CWP Threaded or Solder Ends Sizes 11/4” thru 3” Page 14, 15 Two-Piece Lead Free Ball Valve w/ Hose Cap & Chain Full Port, 600 PSI CWP Sizes...

www.nibco.com AHEAD OF THE FLOW Lead-Free* Plumbing Valves Illustrated Index T/S-FP-600A-LF T/S-FP-600-AD-LF Two-Piece Lead Free Ball Valve Full Port 600 PSI CWP (1/4” - 2”) 400 PSI CWP (21/2” - 4”) Threaded Sizes 1/4” thru 4” Solder Sizes 3/8” thru 3” Pages 27 -29 Two-Piece Lead Free Ball Valve Full Port, 600 PSI CWP Threaded or Solder Ends Sizes 1/4” thru 2” Solder available with Drain (-D) Sizes 1/2” thru 1” Pages 30 - 32 Supply Stops Lead Free Stop & Drain Valves 125 PSI CWP Threaded or Solder Ends Sizes 1/2” and 3/4” Page 33 Quarter-Turn Straight or Angle Style 125 PSI CWP Various End Connections...

www.nibco.com AHEAD OF THE FLOW Lead-Free* Bronze Ball Valves Silicon Performance Bronze™ Alloy • Two-Piece Body • Full Port • Blowout-Proof Stem • MSS SP-110 • IAPMO IGC-157 • NSF/ANSI-61-8 Commercial Hot 180°F (includes Annex F and G) and NSF/ANSI-372 Size Range: 1/4" - 2" Pressure Rating: 600 PSI Non-Shock Cold Working Pressure Maximum Pressure / Temperature: 100 PSI at 300° F Dezincification Resistant Lead-Free* markings: Double oval in body casting, white handle and blue hang tag MATERIAL LIST Nut, Handle Stem Pack Gland Packing, Stem Washer, Thrust Handle End Piece Seat Ring Ball Body Steel,...

www.nibco.com AHEAD OF THE FLOW Lead-Free* Bronze Ball Valves Silicon Performance Bronze™ Alloy • Two-Piece Body • Full Port • Blowout-Proof Stem • Stainless Trim • Vented Ball • MSS SP-110 • IAPMO IGC-157 • NSF/ANSI-61-8 Commercial Hot 180°F (includes Annex F and G) and NSF/ANSI-372 Dezincification Resistant Size Range: 1/4” - 2” Pressure Rating: 600 PSI Non-Shock Cold Working Pressure Maximum Pressure / Temperature: 100 PSI at 300° F Lead-Free* markings: Double oval in body casting, white handle and blue hang tag MATERIAL LIST Nut, Handle Stem Pack Gland Packing, Stem Washer, Thrust Handle...

www.nibco.com AHEAD OF THE FLOW NIBCO® Press System® Lead-Free* Bronze Ball Valves Silicon Performance Bronze™ Two-Piece Body • Copper Ends • Full Port • Blowout-Proof Stem • MSS SP-145 • IAPMO IGC-157 • NSF/ANSI-61-8 Commercial Hot 180°F (includes Annex F and G) and NSF/ANSI-372 Size Range: 1/2” - 2” Pressure Rating: 250 PSI Non-Shock Cold Working Pressure Body Design Pressure: 600 PSI CWP Maximum Pressure / Temperature: 225 PSI at 250° F Dezincification Resistant Lead-Free* markings: Double oval in body casting, white handle and blue hang tag MATERIAL LIST 1. Handle Nut 2. Stem 3. Pack Gland...