Bronze Ball Valves Dezincification Resistant Three-Piece Body • Full Port • Grooved End • 316SS Trim • Blowout-Proof Stem • Vented Ball 600 PSI/41.4 Bar Non-Shock Cold Working Pressure 1. Handle Nut 2. Handle 3. Threaded Pack Gland 4. Stem 5. Body 6. Packing 7. Body End (2) 8. O-Ring Seal (2) 9. Seat Ring (2) 10. Ball (Vented) 11. Thrust Washer 12. Body Bolts 13. Body Nuts Stainless Steel 300 Series Zinc Plated Steel Clear Chromate Plastisol Coated Brass ASTM B 16 Alloy C36000 Stainless Steel ASTM A 276 Type 316 Bronze ASTM B 584 Alloy C84400 PTFE Cast Bronze ASTM B 584 Alloy C84400 Fluorocarbon Rubber PTFE Stainless Steel ASTM A 276 Type 316 or ASTM A 351 Type CF8M Reinforced PTFE Zinc Dichromate Plated Steel ASTM A 449 Grade 5 Zinc Dichromate Plated Steel ASTM A 449 Grade 5 Note: Valves are static grounded by a grounding washer. (Not Shown) NIBCO INC. WORLD HEADQUARTERS • 1516 MIDDLEBURY ST. • ELKHART, IN 46516-4740 • USA • PH: 1.800.234.0227 TECH SERVICES PH: 1.888.446.4226 • FAX: 1.888.336.4226 • INTERNATIONAL OFFICE PH: +1.574.295.3327 • FAX: +1.574.295.3455 www.nibco.com