Carbon Steel Ball Valves Three-Piece Body • Threaded, Butt or Socket Weld Ends • Blowout-Proof Stem • Conventional Port • Enclosed Bolt Design • PTFE Seats • SS Trim • Cast ISO Mounting Pad • Vented Ball • Fire Safe 2000 PSI/138 Bar Non-Shock Cold Working Pressureu CONFORMS TO api-607 Fourth edition fire safe • mss sp-110 • mss sp-72 (butt weld) • api 608 anti-static feature MATERIAL LIST 1. Stem 2. Handle Nut 3. Lock Washer 4. Locking Handle 5. Stop Plate 6. Pack Gland 7. Stem Packing 8. Body End Seal 9. Bolt 10. Body End 11. Body 12. Ball (Vented) 13. Seat 14. Thrust Washer 15. Static Grounding Devices 16. Stop Pin Threaded Stainless Steel Trim ISO Mount Pad Stainless Steel ASTM A 276 Type 316 Stainless Steel ASTM A 276 Type 304 Stainless Steel ASTM A 240 Type 304 Stainless Steel ASTM A 240 Type 304 Stainless Steel ASTM A 240 Type 304 Stainless Steel ASTM A 276 Type 316 Graphite Graphite Carbon Steel ASTM A 193 Grade B7 Carbon Steel ASTM A 216 Grade WCB  Phosphate Coated Carbon Steel ASTM A 216 Grade WCB Phosphate Coated Stainless Steel ASTM A 276 Type 316 or ASTM A 351 Type CF8M Reinforced PTFE 15% Glass Reinforced PTFE 15% Glass Stainless Steel ASTM A 276 Type 304 Stainless Steel ASTM A 276 Type 304 KM-590-CS-R-66-FS-LL Socket Weld Stainless Steel Trim ISO Mount Pad BM-590-CS-R-66-FS-LL Butt Weld Stainless Steel Trim ISO Mount Pad Note: Valves are static grounded by two ball detents that insure electro-continuity between the stem body and ball. The valve has electro-continuity across the discharge path with a resistance of not more than 10 ohms. uFor detailed Operating Pressure, refer to Pressure Temperature Chart on pages 66 and 67. NIBCO INC. WORLD HEADQUARTERS • 1516 MIDDLEBURY ST. • ELKHART, IN 46516-4740 • USA • PH: 1.800.234.0227 TECH