Series 100 Electric Actuators ACTUATORS & CONTROLS THE ELECTRIC SOLUTION OPTIONAL FEATURES NIBCO Series 100, quality, line of electric actuators are designed for quarter-turn applications — ball, butterfly and plug valves; dampers; vents and similar uses. NIBCO Actuators are manufactured in a wide range of output torque and operating speeds to fit your specific requirements. The 100 Series actuators offer compactness and a rugged design in a small package. • Max 2 additional SPDT switches • Heater and thermostat • Optional voltage — 230 VAC, 50/60 Hz single phase STANDARD FEATURES • Permanently lubricated gear train • Stainless steel output drive • 2 second cycle models have unidirectional operation and mechanical brake • 10 and 13 second cycle models have single phase capacitor run motors with internal brake • Enclosures are CSA certified to NEMA 1, 2, 3, 3R, 4, 4X and 5 • Female ISO 5211 mount and drive • Single 1/2" NPT conduit entrance MOTOR DUTY CYCLE 30% 30% 30% * Consult factory for 230VAC locked rotor current. Mounting Bolt Circle Drive Sleeve DOMESTIC CUSTOMER SERVICE TECHNICAL SERVICE

Motor Output Drive Shaft Terminal Strip Limit Switch Female DIN-ISO Mounting Tap - 0.35 Deep (4) Holes on Ø1.42 Bolt Circle .250-20 Tap - .035 Deep (4) Holes on Ø1.97 Bolt Circle Tap - 0.35 Deep (4) Holes on Ø1.65 Bolt Circle F03 Mounting with F03 Drive Sleeve F05 Mounting with F05 Drive Sleeve F04 Mounting with F04 Drive Sleeve DOMESTIC CUSTOMER SERVICE TECHNICAL SERVICE