NXI-1401 series data sheet CAN Communication Converter Module

Product catalog summary

Product Introduction
The NXI-1401-2 is a communication converter module designed for intelligent manufacturing applications. It converts standard CAN protocol to Ethernet protocol data and supports two LAN interfaces compliant with CAN2.0A/B specifications. This module is suitable for fields such as automotive electronics, new energy, and industrial control.

Main Features

Single card with 2 channels and inter-channel isolation.
CAN baud rate ranges from 5kbps to 1Mbps.
Built-in 120Ω termination resistance, with optional access.
Supports CAN2.0A/B specification.
2000VDC voltage isolation for CAN ports.
Operates with a 12VDC power supply and supports LAN communication for individual control.

Technical Specifications

Model: NXI-1401-2
CAN Channels: 2CH
CAN Isolation: 2000VDC
Operating Power: 12VDC±10%, less than 0.5A
Communication Interface: Plug-In connector*2, 4 pin LAN
Operating Temperature: 0℃ to 40℃
Storage Temperature: -20℃ to 60℃
Altitude: Less than 2000m
Relative Humidity: 5% to 90% (no condensation)
Operating Air Pressure: 80 to 110kPa
Dimensions: 130.5mm (H) x 20mm (W) x 230.5mm (D) (with puller)

Application Fields

Automotive Electronic Testing
BMS Test
CAN Device Test
Integrated Test Systems

Notes

For more and latest information, please contact NGI.
For other specifications, please contact NGI.

Catalog excerpts

NXI-1401 series data sheet CAN Communication Converter Module-1

ELECTRONIC SOLUTION PROVIDER FOR INTELLIGENT MANUFACTURING CAN Communication Converter ModuleProduct Introduction The NXI-1401-2 is a communication converter Module. It can convert standard CAN protocol to Ethernet protocol data, single module supports two LAN interfaces compliant with CAN2.0A/B specification. The user can set baud rate, termination resistance and other parameters according to the actual situation. It is suitable for CAN communication related fields such as automotive electronics, new energy, industrial control, etc. Automative Electronic Testing BMS Test Integrated Test Systems CAN Device Test Main Features ■ Single card 2 channels with inter-channel isolation ■ CAN baud rate: 5kbps~1Mbps ■ Built-in resistance: 120Q (access optional) ■ Support CAN2.0A/B specification ■ CAN port supports 2000VDC voltage isolation ■ Single card with single slot, applicable to NXI-F1000 chassis or independent use ■ 12VDC power supply Input, support LAN communication for individual control Communication Card

Open the catalog to page 1

NXI-1401 series data sheet CAN Communication Converter Module-2

ELECTRONIC SOLUTION PROVIDER FOR INTELLIGENT MANUFACTURING Note 1: For more and latest information, please contact NGI. Note 2: For other specifications, please contact NGI.

Open the catalog to page 2