ELECTRONIC SOLUTION PROVIDER FOR INTELLIGENT MANUFACTURING User Manual N62100 Series High Performance Benchtop Electronic Load Hunan Next Generation Instrumental T&C Tech. Co., Ltd. Version: V20240308

ELECTRONIC SOLUTION PROVIDER FOR INTELLIGENT MANUFACTURING Copyright Statement Hunan Next Generation Instrumental T&C Tech. Co., Ltd. (NGI for short) Without the prior permission and written consent of NGI, no content in this manual may be reproduced in any form (including electronic storage and retrieval or translation into a foreign language). NGI shall not be liable for errors or for incidental or consequential damages in connection with the provision, use or application of this manual and any information contained herein. The information provided in this manual is subject to change without...

ELECTRONIC SOLUTION PROVIDER FOR INTELLIGENT MANUFACTURING

ELECTRONIC SOLUTION PROVIDER FOR INTELLIGENT MANUFACTURING

ELECTRONIC SOLUTION PROVIDER FOR INTELLIGENT MANUFACTURING

ELECTRONIC SOLUTION PROVIDER FOR INTELLIGENT MANUFACTURING 1. Preface Dear Customers First of all, we greatly appreciate your choice of N62100 series DC electronic load (N62100 for short). We are also honored to introduce our company, Hunan Next Generation Instrumental T&C Tech. Co., Ltd.( NGI for short). About Company NGI is a professional manufacturer of intelligent equipment and test & control instruments, committed to developing, manufacturing battery simulators, power supplies, electronic loads, and many more instruments. The products can be widely used in the industries of battery, power...

ELECTRONIC SOLUTION PROVIDER FOR INTELLIGENT MANUFACTURING The following terms or symbols may appear in this manual or on products: Warnings A warning notice denotes a hazard. It requires attention to be paid to the execution of operational steps, pointing out conditions and behaviors that may endanger the life and safety of the operator. Be sure to read the information very carefully before executing a given program. Notes Caution signs indicate danger. It requires attention when performing operational steps, pointing out conditions and behaviors that could lead to personal injury or equipment...

ELECTRONIC SOLUTION PROVIDER FOR INTELLIGENT MANUFACTURING Table 2-1 Safety symbol identification 2.2 Safety Instructions In the process of operating and using the instrument, please strictly observe the following precautions. Failure to observe the following precautions or the specific warnings indicated in other sections of this manual may weaken the protection provided by the equipment. The consequences of the user's failure to comply with these precautions will be borne by the user. 2.2.1 Personal Safety arnings • All connections must be made with the equipment power off, improper operation...

ELECTRONIC SOLUTION PROVIDER FOR INTELLIGENT MANUFACTURING Do not use damaged equipment. Before using the equipment, make sure the equipment is not damaged, otherwise it may cause electric shock or fire. Before operating the equipment, please make sure that the equipment ground rod is well grounded! The device is supplied with a power cord, and your device should be connected to a socket, junction box, or three-phase distribution box with protective grounding. During the operation, foreign bodies must be prevented from entering the device, otherwise it may cause short-circuit fault, damage and...

ELECTRONIC SOLUTION PROVIDER FOR INTELLIGENT MANUFACTURING • It is strictly forbidden to put the equipment near the heat source or fire source. The heat of the equipment may cause damage to the equipment or cause a fire. • In the operation of the equipment, do not block the ventilation or cooling system of the equipment, otherwise it may damage the equipment or fire. ZK Notes • It is strictly forbidden to install the equipment in water pipes, air vents, air conditioning outlets and other places where condensate is easy to occur, in order to prevent liquid from entering the inside of the equipment...

ELECTRONIC SOLUTION PROVIDER FOR INTELLIGENT MANUFACTURING 2, please refer to the packing list, check whether the accessories are complete; 3. Check whether the overall appearance of the equipment is abnormal. Remarks 1. If there is any missing or damaged, please contact NGI authorized dealer or after-sales service department immediately. Do not return the device without a positive response. 2. If the packaging content is consistent and no problem, please take good care of the packaging box and related contents, the instrument needs to meet the packaging requirements when returning to the factory....

ELECTRONIC SOLUTION PROVIDER FOR INTELLIGENT MANUFACTURING 3.2 Power Connection Before connecting the power cord, to prevent electric shock and damage to the instrument, please observe the following precautions: Please ensure that the power supply voltage matches the rated power supply voltage of the instrument; Ensure that the power switch is off; Please use the power cord provided by our company and connect one end of the power cord to a three-pronged socket with a protective grounding terminal; Connect one end of the power cord to the power input socket on the rear panel of the instrument...

ELECTRONIC SOLUTION PROVIDER FOR INTELLIGENT MANUFACTURING 3.3 Connection to DUT To prevent electric shock and damage to the instrument, please observe the following precautions: Make sure the device is powered off before connecting to the DUT. Before connection, please confirm rated value of test cable and do not measure the current above the rated value. Before connecting any wiring, please pay attention to the positive and negative polarity marks, reverse connection may burn the electronic load. Connect the female terminal of the test cable to the positive and negative output terminals, and...

ELECTRONIC SOLUTION PROVIDER FOR INTELLIGENT MANUFACTURING 3.3.1 Local Sense The load has two voltage measurement methods: remote sense and local sense. The sense mode needs to be changed by configuration. The factory default is local sense. When the load is light or the accuracy requirement of the application scenario is not high, the local sense method can be used to measure the input voltage. Figure 3-1 Local sense 3.3.2 Remote Sense When the load is heavy, the connection line between the DUT and the load terminal will produce a large voltage drop, which will affect the accuracy of the load...