ELECTRONIC SOLUTION PROVIDER FOR INTELLIGENT MANUFACTURING N6200 Series Wide Range Medium Power DC Electronic Load Product Introduction N6200 series is a programmable DC electronic load with high accuracy, high reliability and high cost performance. It supports local control via screen&button and remote control on PC. It is with built-in LAN port ，CAN port and RS232 interface.N6200 series is designed in a 19 inch 2U chassis, which is available for benchtop use or installation in 19 inch rack. Application Fields Medium power supplies, battery packs, electric tools, BMS, supercapacitors, etc. Main Features Power range: 0-600W/0-1200W/0-1800W Editable rise and fall slew rate Supporting charge & discharge test, OCP test Editable Von/Voff function Standard 19-inch 2U, available for rack installation Stable and reliable CR/CP function supported by hardware Short-circuit simulation Supporting LAN/RS232/CAN communication and SCPI commands Programmable sequence test function(SEQ), up to 100 groups sequence files, up to 50 steps per file Analog programming interface(APG), current monitoring interface, remote/local trigger function Built-in ESR test function (Optional) Adjustable CV loop feedback speed Different voltage response speeds are required in different power applications. When the electronic load does not match with the power supply in response speed, it will cause parameter fluctuation, reduce the measuring accuracy, and even cause numerical oscillation and unsuccessful test. On both LCD and application software, N6200 provides three options for voltage response speed: high, medium and low, which can match various power supplies. It can not only improve the test efficiency but also reduce the cost of equipment, time and expenses. Common Load Performance-Self-excitation NGI Load Performance-Stable Waveform

ELECTRONIC SOLUTION PROVIDER FOR INTELLIGENT MANUFACTURING Equivalent Series Resistance( ESR) test (Optional) ESR is a principal parameter of battery or supercapacitor. N6200 series offers professional ESR measurement function, which can support multiple measurement standards, and possess the advantages of accurate results and stable repeated results. The ESR measurement function absorbs current from the DUT under CC mode. When the current changes, the NGI internal resistance sensing circuit can accurately capture the voltage drop of DUT and calculate ESR value. CR/CP function supported by hardware...

ELECTRONIC SOLUTION PROVIDER FOR INTELLIGENT MANUFACTURING Min. Operating Voltage Range Setting Resolution Setting Resolution Setting Accuracy Range Setting Resolution Slew Rate Communication Response Time Power Measurement Dynamic Mode Single phase, 220V AC±10%, frequency 47Hz~63Hz Temperature Operating temperature: 0°C~40°C, storage temperature: -20C~60C Operating ^wonme^ Altitude <2000m, relative humidity: 5%~90%RH(non-condensing), atmospheric pressure: 80~110kPa Note 1: For other specifications, please contact NGI. Note 2: All specifications are subject to change without notice.

ELECTRONIC SOLUTION PROVIDER FOR INTELLIGENT MANUFACTURING Min. Operating Voltage Range Setting Resolution Setting Resolution Setting Resolution Setting Resolution DC Electronic Load Slew Rate Communication Response Time Voltage Measurement Power Measurement Dynamic Mode Single phase, 220V AC±10%, frequency 47Hz~63Hz Temperature Operating temperature: 0C~40C, storage temperature: -20C~60C Operating Environment Altitude <2000m, relative humidity: 5%~90%RH(non-condensing), atmospheric pressure: 80~110kPa Note 1: For other specifications, please contact NGI. Note 2: All specifications are subject...

ELECTRONIC SOLUTION PROVIDER FOR INTELLIGENT MANUFACTURING Setting Resolution Setting Accuracy (23±5”C) Range Setting Resolution Range Setting Resolution Setting Accuracy (23±5C) Setting Resolution Slew Rate Power Resistance Accuracy (23±5C) Range Voltage Measurement Power Measurement Dynamic Mode Communication Response Time Single phase, 220V AC±10%, frequency 47Hz~63Hz Operating temperature: 0C~40C, storage temperature: -20C~60C operating Environment Altitude <2000m, relative humidity: 5%~90%RH(non-condensing), atmospheric pressure: 80~110kPa Note 1: For other specifications, please contact...