N5800 series Data Sheet supercapacitor capacitance tester
N5800 series Data Sheet supercapacitor capacitance tester
The N5800 series is developed by NGI for the R&D and production of supercapacitors and batteries. It features a high sampling rate of up to 1ms and supports seamless transitions between charging and discharging. It meets high accuracy test requirements for parameters such as charging capacitance, discharging capacitance, DCIR, energy conversion efficiency, and cycle life. The N5800 supports test standards like the six-step method, IEC62391, and QC/T741. The PC application software allows customization of test files and results can be exported in Excel and JPG formats.
- Current range: 0-50A/100A/200A/300A/400A/500A
- Parameters tested: CC charge, CC discharge, CV charge, cycle life, charging capacitance, discharging capacitance, DCIR, etc.
- Sampling rate up to 1ms
- Multifunctional application software with production sorting support
- LED indicator for channel status
- Seamless transition between charging and discharging
- Data storage and analysis via LAN interface
- Voltage range: 0-5V
- R&D, production, and quality inspection of supercapacitors
- Supercapacitor material research
- Other related fields
The N5800 measures charging and discharging capacitance of supercapacitors by recording time and voltage during the process and calculating capacitance based on the voltage and time slew rate. Users can select voltage and time for calculation according to standards like IEC.
The N5800 supports various DCIR test methods including multi-pulse, single-pulse, charge-to-discharge, six-step test, and IEC test, ensuring accurate results.
The N5800 measures supercapacitor parameters during repeated charging and discharging to extract attenuation curves, helping to predict the expected life and improve materials and processes.
The N5800 uses a four-wire sense system to avoid voltage loss and ensure measurement accuracy by directly acquiring voltage at DUT output terminals.
Includes detailed specifications such as voltage, current, power output ranges, accuracy, resolution, and environmental conditions. For further specifications, contact NGI.
Catalog excerpts
7^S ® ELECTRONIC SOLUTION PROVIDER FOR INTELLIGENT MANUFACTURING Product Introduction N5800 series is specially developed by NGI for the R&D and production of supercapacitors and batteries. The sampling rate is up to 1ms, and the charging and discharging process can be seamlessly switched, which can fully meet the test requirements of high accuracy for electrical parameters such as charging capacitance, discharging capacitance, charging DCIR, discharging DCIR, energy conversion efficiency, cycle life, etc. N5800 supports the test standards of six-step method, IEC62391 and QC/T741. Supercapacitor Tester N5800 PC application software supports customization. Users can customize the test files according to the test procedure. The test results can be stored in database and exported in the formats of Excel and JPG. Application Fields ► R&D, production and quality inspection of supercapacitor^ Supercapacitor material research ► Other related fields of supercapacitor Main Features ► Current range: 0-50A/100A/200A/300A/400A/500A ► Voltage range: 0-5V ► Parameters test: CC charge, CC discharge, CV charge, cycle life, charging capacitance, discharging capacitance, DCIR, etc. ► Sampling rate up to 1 ms ► Seamless transition between charging and discharging ► Multifunctional application software, supporting production sorting ► LED indicator light to display the channel status ► Data storage and analysis ^ LAN interface Capacitance test N5800 can measure the charging capacitance and discharging capacitance of supercapacitor. The test method is as follows: charge or discharge the measured supercapacitor under CC mode, record the time and voltage during the charging or discharging process, and calculate the capacitance by calculating the slew rate of the voltage and time during the process. Users can choose voltage and time for calculation according to various measurement standards, such as IEC. I,*(t2- t,) Charging capacitance calculation: C= ^ u I */t -t ) Discharging capacitance calculation: C= U^u/'
Open the catalog to page 1
ELECTRONIC SOLUTION PROVIDER FOR INTELLIGENT MANUFACTURING DCIR test N5800 supports a variety of DCIR test methods: multi-pulse, single-pulse, charge-to-discharge, six-step test and IEC test, which can meet the test needs of most users. NGI core technology ensures that highly accurate results are obtained in various test methods. U IEC DCIR calculation: DCIR= I DCIR Test Theory (IEC Method) Life test N5800 can measure the physical parameters of the supercapacitor during the repeated charging and discharging process and extract its attenuation curves. By analyzing the parameters and curves, users...
Open the catalog to page 2
"=■2 ® ELECTRONIC SOLUTION PROVIDER FOR INTELLIGENT MANUFACTURING Technical Data Sheet For other specifications, please contact NGI. Product Dimension
Open the catalog to page 3All NGI Tech catalogs and technical brochures
- Power supply unit
- DC power supply
- AC/DC power supply
- Measuring device
- IO module
- CE power supply
- Single-output power supply
- Analog I/O
- Power supply for industrial applications
- Switched-mode power supply
- Compact power supply
- Industrial tester
- Tabletop power supply
- Fieldbus I/O module
- Voltage testing system
- Analog IO module
- Variable-output power supply
- Power supply with overload protection
- Laboratory power supply
- Single-phase power supply