N39200 series Data Sheet 2 channel programmable dc power supply

Product catalog summary

Product Introduction
The N39200 series is a high-accuracy, dual-channel programmable DC power supply designed for benchtop use. It supports two isolated channels and can be operated locally via the front panel or remotely via a computer. This series is suitable for lab tests, system integration tests, and production aging lines.

Main Features

Voltage range: 60V/150V
Current range: 4A/8A/10A/20A
Power range: 200W/400W/600W
High definition touch screen with a user-friendly interface
LAN port and RS232 interface
CC&CV priority function
Multiple protections: OVP, OCP, OTP, and short circuit
Dual LAN ports for multiple device control

Design and Functionality
The N39200 series features a compact 2U half 19-inch design, allowing for simultaneous two-station testing. It includes a virtual keypad for parameter input and a SEQ mode for setting output voltage, current, and dwell time for single steps. The cascade mode allows for power expansion by doubling the output current and power while maintaining the same voltage.

Technical Specifications

Readback accuracy: 0.05%+0.1%F.S.
Setting resolution: 1mV/10mV for voltage, 1mA for current
Temperature coefficient: 50ppm/℃
Voltage ripple: 250mVp-p, 20mVrms
Line and load regulation: ≤0.015% and ≤0.03% respectively
Operating temperature: 0℃~40℃
Storage temperature: -20℃~60℃
Dimensions: 2U, 88.0(H) x 214.0(W) x 546.0(D) mm
Net weight: Approx. 7kg

Additional Features
The device includes a four-wire sense interface, AC power socket, output terminal, master/slave interface, air outlet, and supports a single-phase 220V AC input. It is designed to operate at altitudes below 2000m with a relative humidity of 5%~90%RH (non-condensing).

Catalog excerpts

N39200 series Data Sheet 2 channel programmable dc power supply-1

ELECTRONIC SOLUTION PROVIDER FOR INTELLIGENT MANUFACTURING Product Introduction N39200 series is a high-accuracy & dual-channel programmable DC power supply, available for benchtop use. N39200 standalone supports 2 channels output, with each channel isolated. Both local operation on front panel and remote control on a computer are supported. N39200 can be widely used in lab test, system integration test, production aging line, etc. Main Features ^ Voltage range: 60V/150V ^ Current range: 4A/8A/10A/20A p Power range: 200W/400W/600W ^ CC&CV priority function ^ Multiple protections: OVP, OCP, OTP and short circuit Dual channels, compact size and light weight N39200 series adopts 2U and half 19 inch design, with 2 channels in a single device. Each channel is isolated. One device can support 2-station test simultaneously, which simplifies the test platform and improves test efficiency. DC Power Supply ^ High definition touch screen ^ User-friendly interface ^ LAN port and RS232 interface ^ Dual LAN ports design ^ Single device with 2 channels, each channel isolated UI flat icons UI flat icons offer convenient and quick operation. Virtual keypad SEQ mode N39200 is designed with a virtual keypad for parameters input. SEQ mode allows setting of output voltage, output current and dwell time for single step.

Open the catalog to page 1

N39200 series Data Sheet 2 channel programmable dc power supply-2

ELECTRONIC SOLUTION PROVIDER FOR INTELLIGENT MANUFACTURING Cascade mode for power expansion N39200 supports two channels parallel mode internally. Under parallel mode, the output voltage remains the same. The output current and power will be doubled. Syste m IP Address 192.168.0.123 Baud Rate Zeroing V/I Poweron output 通道选择 V-Set 电压设置 I-Limit 电流设置 CV/CC Priority CC&CV priority function N39200 has the function of selecting priority of voltage-control loop or current-control loop, which enables N39200 to adopt the optimal test mode for different DUTs, and thus protect the DUT. As shown in figure...

Open the catalog to page 2

N39200 series Data Sheet 2 channel programmable dc power supply-3

ELECTRONIC SOLUTION PROVIDER FOR INTELLIGENT MANUFACTURING Technical Data Sheet Note 1: For other specifications, please contact NGI. Note 2: All specifications are subject to change without notice.

Open the catalog to page 3