ELECTRONIC SOLUTION PROVIDER FOR INTELLIGENT MANUFACTURING User Manual N2600 Series High Precision Source Meter(SMU) Hunan Next Generation Instrumental T&C Tech. Co., Ltd.

ELECTRONIC SOLUTION PROVIDER FOR INTELLIGENT MANUFACTURING Copyright Statement Hunan Next Generation Instrumental T&C Tech. Co., Ltd. (NGI for short) Without the prior permission and written consent of NGI, no content in this manual may be reproduced in any form (including electronic storage and retrieval or translation into a foreign language). NGI shall not be liable for errors or for incidental or consequential damages in connection with the provision, use or application of this manual and any information contained herein. The information provided in this manual is subject to change without...

ELECTRONIC SOLUTION PROVIDER FOR INTELLIGENT MANUFACTURING

ELECTRONIC SOLUTION PROVIDER FOR INTELLIGENT MANUFACTURING 1 Preface Dear Customers, First of all, we greatly appreciate your choice of N2600 series Source Meter (N2600 for short). We are also honored to introduce our company, Hunan Next Generation Instrumental T&C Tech. Co., Ltd.( NGI for short). About Company NGI is a professional manufacturer of intelligent equipment and test & control instruments, committed to developing, manufacturing battery simulators, power supplies, electronic loads, and many more instruments. The products can be widely used in the industries of battery, power supply,...

ELECTRONIC SOLUTION PROVIDER FOR INTELLIGENT MANUFACTURING 2 Safety Instructions 2.1 Safety Notes This instrument is intended for use by specific personnel. Such personnel need to be able to recognize shock hazards and be familiar with necessary safety precautions to avoid potential injury. Please read and follow all installation, operation, and maintenance information carefully before using this instrument. For complete product specifications, please refer to this manual. If the instrument is used in a manner not specified, the protective functions provided by the instrument could be impaired....

ELECTRONIC SOLUTION PROVIDER FOR INTELLIGENT MANUFACTURING cables, test leads, and jumpers for frayed or broken wires. Please be careful when there is a risk of electric shock during use. Hazardous voltages may be present in the cable connector jacks or test fixtures. There is a danger of electric shock when the voltage level exceeds 30Vrms, 42.4Vpeak or 60V DC, please take precautions. During the operation and use of this instrument, please strictly observe the following safety precautions. Failure to observe the following safety precautions or specific warnings indicated elsewhere in this manual...

ELECTRONIC SOLUTION PROVIDER FOR INTELLIGENT MANUFACTURING arnings Warnings indicates danger. It requires an attention before performing an operational step, and indicates conditions and actions that may endanger the life of the operator. Be sure to read the relevant information carefully before performing the specified procedure. Table 2-1 Safety Symbols 2.3 Operating Environment N2600 series SMU is suitable for indoor and low-condensation areas. Its general operating environment requirements are listed as below. Table 2-2 Operating Environment Requirements Operating Environment Requirement...

ELECTRONIC SOLUTION PROVIDER FOR INTELLIGENT MANUFACTURING 3 Product 3.1 Brief Introduction N2600 series is a digital source meter developed by NGI, which closely combines the functions of high-accuracy source and high-accuracy measurement. It integrates 5 functions (voltage source, current source, I/V/R measurement) in one instrument. The measurement range covers 200V to 1μV, 10A to 10pA, 200MΩ to 10μΩ. The maximum pulse output current can be up to 10A. The measurement resolution is 6½ digits. The basic accuracy can reach 100μV, 600pA, 300μΩ. N2600 series has built-in constant voltage source,...

ELECTRONIC SOLUTION PROVIDER FOR INTELLIGENT MANUFACTURING Supporting SCPI protocol Front USB port, supporting screenshot storage Supporting linear staircase sweep, logarithmic staircase sweep and custom sweep 4.3 inch LCD screen, simple operation interface, easy to use Remark【1】 ：Only N2610-100-03 supports this function. 3.3 Overview 3.3.1 Appearance & Dimension 214.0 SourceMeter GUARD SENSE Figure 3-2 Rear Panel Dime

ELECTRONIC SOLUTION PROVIDER FOR INTELLIGENT MANUFACTURING 77.7 Figure 3-3 Side Dimension(mm) 3.3.2 Front Panel Introduction Figure 3-4 Front Panel Product Model No. and Basic Parameter Displaying related information Power Switch Turn on/off power supply of the device Function Button Specify the function listed at the bottom of the display

ELECTRONIC SOLUTION PROVIDER FOR INTELLIGENT MANUFACTURING

ELECTRONIC SOLUTION PROVIDER FOR INTELLIGENT MANUFACTURING Figure 3-5 Knob Table 3-3 Knob Function By rotating: to select the required item, adjust the parameter By pressing: to enter the edit interface, confirm the input 3.3.5 Front Panel Wiring Terminals s+ GUARD SENSE Figure 3-6 Front Panel Wiring Terminals Table 3-4 Identification Positive Sampling Terminal Negative Sampling Terminal Positive Input/Output Terminal Negative Input/Output Terminal Drive protection device GUARD SENSE Compensate the voltage drop in the output lead

ELECTRONIC SOLUTION PROVIDER FOR INTELLIGENT MANUFACTURING 3.3.6 Rear Panel Introduction Figure 3-7 Rear Panel Table 3-5 No. Output Port Digital I/O Input/Output Port Definition V+/V-、S+/S- Output port Ventilation and heat dissipation TRIGGER LINK External trigger link Power Input Switch Power Input Socket Connect AC220V/115V to supply power to the device Figure 3-8 Rear Panel Wiring Terminal

ELECTRONIC SOLUTION PROVIDER FOR INTELLIGENT MANUFACTURING

ELECTRONIC SOLUTION PROVIDER FOR INTELLIGENT MANUFACTURING 3.3.6.2 Trigger Port（Trigger） Input and output triggers receive and send through the rear panel trigger linker. The trigger port has four input and output trigger wires. In the test, select line #2 for output triggers, select line #1 for input triggers, and input/output line assignments can be changed in the Configure Trigger menu. Figure 3-10 shows the trigger ports. Rear Panel Pinout Figure 3-10 Trigger Port 3.3.6.3 Network Port（LAN） N2600 series is equipped with a LAN port for connecting the computer through a