ATON WIRE ATON WIRE IS A DIAMETER & OVALITY GAUGE FOR CONTINUOUS MONITORING OF ROLLING AND DRAWING MILL PRODUCTION. TO MEET CHALLENGING RETURN-OF-INVESTMENT REQUIREMENTS NEXTSENSE OFFERS HIGH ACCURACY AT A REASONABLE PRICE. The ATON Wire gauges measure diameter and ovality of round profiles with a two-axes shadow sensor, a 50 mm measurement range and an accuracy of 5 pm. Depending on the material temperature and environment conditions you can choose between three product versions. Benefit from enhanced product quality and higher throughput in your production and increase yield by choosing an ATON Wire system. Choosing a sophisticated profile measurement system allows for maintaining dimensional accuracy over the entire coil length and enables you to take immediate corrective actions after the detection of deviations. CHECKS DIAMETER AND ROUNDNESS

ATON WIRE COLD Material condition Cold < 40°C Environment condition Clean < 40°C Dimensions Width: 430 mm Height: 530 mm Depth: 100 mm Passline: 300 mm Diagonal axes Use cases Wire drawing Cold rolling mills Peeling, grinding and polishing of bars and wires ATON Wire Cold uses a protective housing. The scope of supply consists of the measurement frame with all necessary electronics included and a PC connected by Ethernet to the frame (<100m) or fiber optic (<2000m). ATON WIRE WARM Material condition Warm < 200°C Environment condition Clean < 50°C Dimensions Width: 600 mm Height: 535 mm Depth:...