4 CHANNELS WIRELESS DATA LOGGER with Embedded Web Server

GENERAL SPECIFICATIONS • IoT Stand Alone Device with IP67 enclosure • 4 differential analog channels • Measures: mV, mA, mV/V, NTC,Thermocouple • 2G/3G, LTE CAT-M / NB1*, SigFox, Lo.Ra, WiFi • Web Server on board • Power supply of sensors thorugh data logger • 0,05% F.S. Accuracy with mV measure • Compatibility with Third Parties’ Cloud Platforms PHYSICAL CHARACTERISTICS Weight 780 grams (batteries included) 151 x 125 x 90 mm (without cable gland and antenna) 5 screws clamp termination blocks; it clamps solid and stranded conductors up to 1,3 mm² (16 AWG) Calibration Recommended every 1 year...

DETAILED SPECIFICATIONS NI400 SigFox WiFi (for logger setup) WiFi (for data sending) Analog Input Number Vibrating Wire** Switchable Power supply (Selectable by Factory: 24V, 12V, 5V) Compatibility with Third Parties’ Cloud Platforms Weight (Batteries Included) * Available from 2022 **Vibrating Vire reading is under development even if User Manual is ready for this feature.

Dimensions (L x W x H, without cable glands and antenna) 5 screws clamp termination block up to 1,3mm2 (16AWG) Recommended every 1 year Operating Voltage ARM Cortex - M3 MCU with 1 MB Flash, 20 MHz CPU, ART Accelerator Mass storage SD CARD 32 GB for data (min. 5 Mega data points) and WEB pages Clock accuracy High precision RTC (real time clock with battery back-up) On-board sensors Temperature measured on the electronic board Analog differential inputs 4 differentials channels, individually configured at factory, according to the following sensors: - Thermocouples - Vibrating Wire + Thermistor...

DETAILED SPECIFICATIONS Modbus RTU sensor slave RS485 5 screw clamp port for max. No.64 Modbus digitized sensors. Communication interface: RS485 Communication protocol: MODBUS RTU The voltage ‘V OUT’ is switched on and off from the software. V OUT is the unregulated power supply input ‘V IN’ (0,75 A) Power supply management (always on or energy safe) Integrated SIM holder Extended temperature range (-40° to 85°C). Stubby antenna with SMA connector WPA-WPA2 PSK RCZ1 – 868MHz (Europe) RCZ2 – 902MHz (US, Canada and Mexico) RCZ3 – 923Mhz (Japan and Korea) RCZ4 – 920-922MHz (ANZ, Latin America and...

DETAILED SPECIFICATIONS Cold Juntion Compensation Accuracy ± 0.25°C * With stable temperature conditions. Tested in climatic chamber. Supported Thermocouples (optional) Reading resolution Measurement accuracy <0.05% F.S. with m/V measure (0,1% F.S. for NTC) - with Standard Measurement Temperature drift Input noise voltage Input limits DC common mode rejection Normal mode rejection Input impedance OUTPUT Digital output One relay output (for alarm, etc.): volt-free closure (low voltage 30V, 1A) PROTECTIONS Electro-mechanical relays for each measuring channel: Electrical endurance: min.relays for...

DETAILED SPECIFICATIONS batteries (no external power supply) min 2 A continous current discharge, min 2 A pulse capability, min 3 Ah capacity Operating time with internal batteries > 2 months with 1 acquisition every 1 hour with no.4 instruments (24V DC @12 mA @25 °C, 5 sec warm up), data transmitted via FTP/email after every acquisition, datalogger configured in “Timed mode” > 6 months with 1 acquisition every 1 hour with no.4 instruments (24V DC @12 mA @25 °C, 5 sec warm up), data transmitted via FTP/email once a day, datalogger configured in “Timed mode”. > 7 months with 1 acquisition every...

INTERNET OF THINGS SENSORS Next Industries S.r.L Via G. Di Vittorio 2/F, 20065 Inzago (MI) - Italy ARTIFICIAL INTELLIGENCE