MVS 2620-IPK Datasheet
2Pages

{{requestButtons}}

Catalog excerpts

MVS 2620-IPK Datasheet - 1

Main Features IP65-rated rugged design Intel Atom® x7 , 4c, 2.0GHz E3950 (Apollo-lake) 9~36VDC with ignition control Built-in GPS with optional dead reckoning Up to two WLAN or two 3G/LTE via 3 mini-PCIe slots Electrical isolation for CAN 2.0B & GPI/O Optional OBD function (SAE J1939/J1708) Rich and various GbE, USB 2.0, serial I/O and storages Compliant to E-mark and ISO 7637-2 Compliant to MIL-STD-810G in vibration/shock Product Overview MVS 2620-IP, an IP65-rated rugged enclosure, maintenance-free box computer, is ideal for data acquisition in extreme environments throughout a number of in-vehicle applications, like transportation, heavy duty and waste management, etc. All external interfaces, including Gigabit Ethernet, isolated CAN Bus and digit I/O, USB, and RS232/485 serial ports, are implemented on IP67-proof connectors for reliable data transmission in harsh and rugged environments. MVS 2620-IP is a modular design, it is flexible to use other kinds of expansion boards to extend different I/O functions for quickly tailored to a vast number of applications. Inside the system, there’re four mini-PCIe slots with three SIM card slots offering WLAN, 3G/LTE, CAN OBD (SAE J1708/J1939) or CVBS functionality. Besides, it can operate at temperatures from -30°C~70°C under fanless. MVS 2620-IP supports 9~36VDC power input with ignition managemnt and 12VDC at 2A maximun power output. It is compliant to E-mark and ISO 7637-2 in vehicle certificate and meet US military MIL-STD-810G, category 4, composite wheeled vehicle, for vibration and shock criteria. Intel Atom® x7, 4C, 2.0GHz E3950 (Apollo Lake) 204-Pin DDR3L SO-DMIM socket support 1600MHz up to 8GB, 4GB industrial grade memory in default Storage 1 x 2.5" SATA 3.0 SSD/HDD 1 x CFast (externally acessible) 1 x Full size mini-PCIe socket (USB 3.0/2.0) 1 x Full size mini-PCIe socket (USB 2.0) 1 x Full size mini-PCIe socket (USB 2.0 + PCIe) 1 x Half size mini-PCIe socket (USB 2.0 + PCIe) GPS and On Board Sensor 1 x Default U-blox NEO-M8N GNSS module for GPS/Gloness/QZSS/ Galileo/Beidou Optional modules with dead reckoning available Built-in G-sensor Ethernet 2-Port 10/100/1000Mbps Controller: Intel® 1210-T1 Modular Vehicle Computer System 6 x LED indicators for power/storage/WLAN/WWAN/status/health 1 x USB type A USB 2.0 port (w/lid) 1 x SIM slot (w/lid) 1 x Mic-in, 1 x Line-out, power & reset buttons for M12 connector 3 x Antenna holes for WWAN/GPS 1 x Expansion port (M12-type) reserved I/O Interface-Rear Circular 22-pin -- 1 x RS232 (Tx,Rx) -- 2 x RS232 (full, RI for 5V/12V selectable) M12 8-pin -- 1 x GbE M12 8-pin -- 2 x U

Open the catalog to page 1
MVS 2620-IPK Datasheet - 2

Dimension Drawing -- 1 x Line-out -- DC12V-out, 2A max. -- OBD from optional VIOB-CAN-05/06 module (SAE J1708/J1939) -- 2 x CAN Bus 2.0B from optional VIOB-CAN-04 module Circular 31-pin -- 1 x VGA, resolution up to 2560 x 1600@60Hz -- 1 x GbE -- 2 x RS-485 (2-wire) -- 1 x CAN 2.0B w/ isolation 6-Bit DIP switch (w/ lid) 3 x Digital inputs -- Source-type: 9~36V-IN (default) -- Eexternal-type: 0~33VDC pull-high -- Isolation 3 x Digital outputs -- Source-type: 9~36V-in (norminal 35 mA@24V) (default) -- External 5~27VDC pull-high, sink current: typical 220mA for each bit, 500mA max. (@25°C) --...

Open the catalog to page 2

All Nexcom - Mobile Computing Solutions catalogs and technical brochures

  1. MVS 5600-IPK

    2 Pages