FRIGID-X™ TOOL COOLING SYSTEM ▼ MORE THRN INTELLIGENT FRIGID-X™ TOOL COOLING SYSTEM Produce cold air from compressed air to cool machine tools and other applications to replace messy misting systems, improve product quality and increase production speeds WHAT ARE THEY - REASONS T Frigid-X™ Tool Cooling System for dry machining applications - replaces polluting and often toxic mist systems to improve dry machining operations. No mess, no residue and low in cost. It is efficient and can improve dry machining operations and assist in spot cooling applications for a variety of industrial machining processes by increasing machining rates and extending tool life. Produces cold air at approximately 50° F (28° C) below supply air temperature. The unit is muffled for quiet operation. No moving parts assures long life, maintenance free operation while extending tool life and improving production rates. It can prevent smearing of metal or plastics and eliminates wheel loading. Factory set for optimum cooling effect and to prevent freeze up. Can often replace costly mist coolants and certainly improves the quality and output of all types of dry machining operations from metals to plastics. Unit is low cost, no electricity with no moving parts and is essentially maintenance free. FRIGID-X TOOL COOLER API ► Drill and cutter grinding ► Milling, Drilling, Routing and Surface Grinding ► Plunge & Form Grinding ► Setting Hot Melt Adhesives ► Tire and Rubber Grinding ► Band Saw Blade Cooling ► Chill Roll Nip Cooling All Metal Parts, Stainless Steel Body. Tests Show Frigid-X1' consistently quieter than competition! FRIGID-X ADJUSTABLE SPOT ► Maintenance free operation ► Made of durable stainless steel and metal arts-no cheap plastic parts ► Improves production rates and finished part remains dry ► Eliminates coolant costs ► System uses strong magnetic base FRIGID-X TOOL COOLER SYSTEM - HOW IT WORKS Compressed air enters at point (A) into the vortex tube component of the tool cooling. The vortex tube splits the compressed air into a cold (B) and hot (C) stream of air. The hot air from the vortex tube is vented to the atmosphere at point (D) after being muffled to reduce noise. Cold air enters into the muffler (E) and then distributed through the hose distribution kit (F) and onto the tool being cooled. A strong magnet (G) holds the tool cooler onto the machine Nex Flow™ Air Products Corp. 10520 Yonge Street, Unit 35B-220 Richmond Hill, ON, Canada, L4C 3C7

FRIGID-X™ TOOL COOLING SYSTEM FLEX HOSE /— MAGNETIC BASE FRIGID-X TOOL COOLING SYSTEM A Model 57025FS Frigid-X™ Tool Cooler is used on a grinding application to reduce the heat and extend wheel life. A Series of Model 57015FS Frigid-X™ Tool Coolers are used to cool the slitting cutters in a continuously moving paper roll slitting machine. E-mail:- "[email protected] "[email protected] "[email protected] Web:-"Www.nexflow.com "Www.nexflowair.com "Www.nex-flow.com

FRIGID-X™ TOOL COOLING SYSTEM USE AND SELECTION OF FRIGID-X TOOL COOLER Always use clean, dry compressed air. A manual filter is supplied with every 15 SCFM system and a filter with automatic drain with larger sizes to insure dry air. If oil is a major problem in the compressed air line, an oil removal filter is also recommended. The temperature of the air can be controlled by reducing the pressure using either a regulator or manual shut-off valve. A solenoid valve may also be connected into the machine operation to turn the air supply to the cooling unit on-off as it is needed, thereby conserving...

FRIGID-X™ TOOL COOLING SYSTEM FRIGID-X™ TOOL COOLING SYSTEM E-mail:- "[email protected] "[email protected] "[email protected] Web:-"Www.nexflow.com "Www.nexflowair.com "Www.nex-flow.com