FRIGID-X™ MINI SPOT COOLER FRIGID-Xtm MINI SPOT COOLER Cool small parts and tooling with a compact spot cooler with no moving parts. WHAT ARE THEY - REASONS TO USE The Frigid-X™ Mini Spot Cooler is a low cost and maintenance free system which utilizes a vortex tube to produce cold air at one end. It is quiet and compact. Designed for small parts, the Frigid-X™ Mini Spot Cooler produces a stream of 15 to 20 degree F (minus 9.5 to 7 degree C) of cold air to prevent heat buildup depending in inlet air temperature. It can improve tolerances in machining of small critical parts and increase production rates. Cold air is directed using the flexible tubing. A magnetic base is standard for portability and easy mounting of the mini spot cooler APPLICATIONS: | ► Needlecooling on sewing machines ► Coolingsmallblades ► Grindinglenses and small parts ► Coolingsmalltools The Mini Spot Cooler utilizes a vortex tube to create one hot stream and one cold stream (see page 9). The cold air produced at the cold end is directed to the surface to be cooled using a flexible hose. The Mini Spot Cooler is used in the cooling of needles on a sewing machine used to produce heavy materials for carpeting. E-mail:- ■ [email protected] ■ [email protected] ■ [email protected] Web:- ■ www.nexflow.com ■ www.nexflowair.com ■ www.nex-flow.com

FRIGID-X™ BOX COOLER FRIGID-XTM BOX COOLER Packaged System for cooling small enclosures MORE THAN INTELLIGENT The Frigid-XTM Box Cooler is used for cooling small enclosures for laboratory use, environmental chambers and any application where an enclosure needs cooling (Note: Not approved for electrical and electronic control panels but may be used if approvals not required). This low cost system utilizes a stainless steel vortex tube with an adjustable hot end to control the temperature produced in the enclosure. In the package are all the necessary items to attach the vortex tube along with...