Power Measurement

Product catalog summary

Overview: The Power Meter Adaptor is an accessory designed for use with PSM1700 and PSM1735 Phase Sensitive Multimeters. It provides isolation and attenuation for input power measurements on electronic products connected to a single-phase low voltage AC supply.

Specifications:

Power Input: IEC socket with a current range of 5mA-10A.
Power Output: IEC shuttered outlet with a voltage range of 2V-250V.
Voltage Rating: 250V rms.
Frequency Range: 10Hz-1KHz.
Current Rating: 10A rms.
Voltage Accuracy: ±2%.
Current Accuracy: ±2%.
Connections to PSM: Grounded BNC.
Voltage Scale Factor: 50 – 1.
Current Shunt Value: 20mΩ.

Functionality: The adaptor uses toroidal transformers and calibrated burden resistors to provide isolation and fixed scaling factors, enabling accurate power measurements.

Catalog excerpts

Power Meter Adaptor The Power Meter Adaptor is an isolation and attenuation accessory designed for use with PSM1700 and PSM1735 Phase Sensitive Multimeters. Using torroidal transformers and calibrated burden resistors, the Power Meter Adaptor provides isolation and fixed scaling factors that enable the PSM units to make input power measurements on electronic products that connect to a single phase low voltage AC supply. Power input: Power output: Voltage rating: Current rating: Connections to PSM: Voltage scale factor: Current shunt value: IEC socket IEC shuttered outlet 250V rms 10A rms Grounded BNC 50 – 1 20mΩ Current range 5mA-10A Voltage range 2v-250v Frequency range 10Hz-1KHz Voltage accuracy ±2% Current accuracy ±2%

Open the catalog to page 1

All Newtons4th Ltd. catalogs and technical brochures

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list