Gearbox Performance Overview

Specifications:
The document provides detailed specifications for various gearbox models (AE50, AE70, AE90, AE120, AE155, AE205, AE235) across different stage ratios. Key parameters include nominal output torque, maximum output torque, emergency stop torque, nominal and maximum input speeds, backlash levels, torsional rigidity, radial and axial load capacities, service life, efficiency, weight, operating temperature, lubrication type, protection degree, mounting position, and noise level.

Nominal Output Torque:
Torque values vary by model and stage ratio, with AE235 offering the highest nominal output torque across most ratios.

Input Speed:
Nominal input speeds range from 2000 to 4000 rpm, while maximum input speeds range from 4000 to 6000 rpm, depending on the model.

Backlash:
Micro, reduced, and standard backlash values are provided, with micro backlash being the smallest and standard backlash the largest.

Load Capacities:
Maximum radial and axial load capacities are specified, with AE205 having the highest radial load capacity.

Efficiency and Service Life:
Efficiency is ≥96% for stage ratios 3-10 and ≥94% for 9-100, with a service life of 25,000 hours.

Dimensions:
Dimensions for each model are detailed, including output and input dimensions, which are crucial for installation and compatibility with motors.

Inertia:
Mass moments of inertia are provided for each model and stage ratio, indicating the resistance to changes in rotational speed.

Additional Features:
The gearboxes are designed for all-direction mounting, operate within a temperature range of -10°C to 90°C, and use synthetic lubrication grease. They have an IP64 protection rating, indicating resistance to dust and water spray.

Conclusion:
This document serves as a comprehensive guide for selecting the appropriate gearbox model based on performance requirements and installation constraints. It highlights critical parameters such as torque, speed, load capacity, and efficiency, ensuring users can make informed decisions.