Microslide Series Newmark’s Microslide series linear stages offer high performance in a small package. Microslide stages are designed for space limited applications and can be congured in compact multi-axis assemblies. The Microslide linear stages offer very high resolution when driven by the NSC-1S or NSC-M controllers. All Microslide series stages are machined from 6061 aluminum alloy to provide a light and stable construction. The Microslide weighs less than a pound. For more reliability and durability, the guide rods, leadscrew and switches are protected by a strong aluminum cover. The use of linear guide rod bearings provide a smooth motion. Since the carriage is supported over the entire travel of the stage, a good cantilevered load capacity can be achieved. Separate connectors for motor power and limit switch signals are provided for ease of operation. Integrated limit switches and a high torque size 17 stepper motor are supplied as standard items. MOTION CONTROLLERS For optimum performance and seamless compatibility, we recommend using one of the following Motion Controllers/ Drivers. NSC-1S Series Single Axis Stepper Motor Controller NSC-M Series Multi Axis Stepper Motor Controller For more information on our controllers call us at 949-830-0621 or vist our website at www.newmarksystems.com

Microslide Series Specifications Motor Connection Base Model Travel Stage Weight Description Phase A Phase A’ Phase B Phase B’ A Center Tap B Center Tap Mates with Molex connector 43020-0601. Use with Molex terminal pin 43031. Material Finish Aluminum Black Anodize Description Positive Limit Negative Limit Gnd Limit Limit switches are wired normally open. Mates with Molex connector 43020-0401. Use with Molex terminal pin 43031. Corporate Headquarters 23362 Madero Road, Suite G Mission Viejo, CA 92691 949-830-0621 tel 949-830-9390 fax www.newmarksystems.com Newmark Systems, Inc is a worldwide...