We reserve ourselves the right to modify whole or part of this product, without notice. · Especially designed for our grippers, this electronic system allows to store in electronic memory the 2 extreme positions of the fingers, and from 1 to 4 different programmed workpieces on shaft or in boring .One additional information is available : workpiece “not recognized” or error. · This embedded system is very easy to use, the storage being done automatically for the first gripped workpieces, with differential pressure of safety. · Additional elements, such as teaching box, electronic card, dedicated PLC... are not needed, so this system can be used by any operator on site. · Information being also delivered in the event of tightening on workpieces which are "not recognized" or blocked on obstacle, the AUTOTACT series M can satisfy operations like dimensional sorting, selection or orientation, without camera. · In assembly applications, this system allows an important increase of productivity due to the suppression of time to change tools, and the same gripper is able to grip various workpieces in the agreed order. · Electronic circuit is moulded in a IP65 metal box and exchange is possible with all the models of series NKA, NKP and NLG. · Designed and manufactured in Europe. Control system AUTOTACT, series M with INTEGRATED position storage. Program reset, with manual sliding motion of the Autotact system. Setting in memory of the total stroke of the fingers with pressure of use. in boring on shaft Setting in memory of positions of the fingers on workpieces with pressure of safety. Stroke « not recognized » 10 Esplanade de la gare BP 69 – 95112 SANNOIS Tel : 01.39.81.02.37 - Fax : 01.39.81.46.74 [email protected] Control system AUTOTACT Series M With INTEGRATED Position storage SELF-PROGRAMMABLE Up to 7 informations : AND / OR It is possible to teach with the same gripper, dimensions of parts in closing (on shaft) and in opening (in boring), and to use them in the same program.