Wheel Loaders W110C - W130C
12Pages

{{requestButtons}}

Catalog excerpts

Wheel Loaders W110C - W130C - 1

STANDARD BUCKET PAYLOAD OPERATING WEIGHT

Open the catalog to page 1
Wheel Loaders W110C - W130C - 2

T THE HEAVY DUTY AXLES WITH 100% FRONT LOCK* WITH 100% FRONT LOC T R N C SCR is a well-proven and reliable technology used on trucks in Europe since 2004. Since this solution does not affect combustion, it delivers more power with less fuel. SCR ONLY technology doesn’t require a particulate filter. 2 *optional in alternative to Limited slip differentials

Open the catalog to page 2
Wheel Loaders W110C - W130C - 3

HEEL LOADER THE COOLING BOX Most wheel loaders mount their radiators back to back. At New Holland we have mounted them to form a cooling module like a box. The benefit is better cooling, in the harshest of environments. In addition, with a programmable reversing fan as standard, cleaning radiators will become a thing of the past. MORE PAYLOAD WITH REAR MOUNTED ENGINE Rear mounted engine result for you is more material in your bucket. In addition, it allows to use less counterweight. Less dead weight results in less stress on the axles, the brakes and the tyres.

Open the catalog to page 3
Wheel Loaders W110C - W130C - 4

LESS FUEL WITH BETTER COMBUSTION Engine combustion is optimised for efficiency: it only uses fresh air and occurs at optimum temperature, guaranteeing the best engine output for power and fuel efficiency. LESS MAINTENANCE WITH NO PARTICULATE FILTER With our AdBlue technology, we don’t need a particulate filter, so you make significant saving on the maintenance. It also means that the temperature in the engine compartment is lower, which means a longer life for the rubber parts and lower cooling needs than other Tier 4 solutions. The smaller fans in our wheel loaders mean you use less fuel....

Open the catalog to page 4
Wheel Loaders W110C - W130C - 5

MORE MATERIAL IN THE BUCKET WITH REAR MOUNTED ENGINE Rear mounted engine result for you is more payload in your bucket. In addition, it allows to use less counterweight. Less dead weight results in less stress on the axles, the brakes and the tyres. LESS MAINTENANCE WITH OPEN DIFFERENTIAL The optional open differentials and front auto-lock reduce tire wear because of no wheel slippage. The absence of friction in the differentials increases oil life by 50%. More effective lubrication with longer lasting effect increases reliability. For a limited investment you can choose the limited slip...

Open the catalog to page 5
Wheel Loaders W110C - W130C - 6

EXTRA WIDE ACCESS The 4 wide steps and 2 handles make it easy for you to reach the cab; the wide door with no obstacles makes it easy to gain access. OUTSTANDING VISIBILITY You can work fast and confidently with excellent all-round visibility, further enhanced by the curved shape of the rear hood, which is very low due to the small cooling package. You can work in comfort with the efficient ventilation ensured by 16 air vents and the optional air conditioning system. In addition, the doors open 180° and can be easily locked in open position or unlocked from the driver’s seat 6

Open the catalog to page 6
Wheel Loaders W110C - W130C - 7

OPERATOR SAFETY AND LOW VIBRATIONS You will enjoy the protection of our reinforced cab, which guarantees protection against roll over (ROPS) and falling objects (FOPS). We placed the engine at the back of the machine, far from the cab, so that you will feel lower vibrations in the cab. SITTING COMFORTABLY WITH CONTROLS AT YOUR FINGERTIPS You will enjoy the comfort of the heated seat with high vibration absorption.You can focus entirely on the job at hand and work comfortably with the ergonomic positioning of the control panel under your right hand. The overhead radio positioning and ample...

Open the catalog to page 7
Wheel Loaders W110C - W130C - 8

AXLES AND DIFFERENTIAL For outstanding traction with 50% longer maintenance intervals and 30% less tire wear 100% auto-lock differential on front axle and open rear axles Front and rear ZF Heavy Duty axles (options) with Open Differential type MT-L3065-II Excellent traction 29% Limited slip differential on front and rear axles front and rear axle ZF type MT-L3065-II

Open the catalog to page 8
Wheel Loaders W110C - W130C - 9

PERFORMANCE DATA Z-BAR buckets 2.1 m3 Bucket with bolt on: Bucket volume (heaped) Bucket Payload Maximum material density Bucket outside width Bucket weight Tipping load - straight Tipping load - Articulated at 40° Breakout force Lift capacity from ground A -Dump height at 45° at full height B - Hinge pin height C -Overall height D -Bucket reach at full height E - Dig depth L - Overall length with bucket on the ground R - Turning radius to front corner of the bucket Bucket rollback in carry position Dump angle at full height Machine operating weight LONG REACH buckets

Open the catalog to page 9
Wheel Loaders W110C - W130C - 11

PERFORMANCE DATA 2.4 m3 Bucket with bolt on: Bucket volume (heaped) Bucket Payload Maximum material density Bucket outside width Bucket weight Tipping load - straight Tipping load - Articulated at 40° Breakout force Lift capacity from ground A -Dump height at 45° at full height B -Hinge pin height C -Overall height D -Bucket reach at full height E - Dig depth L - Overall length with bucket on the ground R -Turning radius to front corner of the bucket Overall length without bucket Bucket rollback in carry position Dump angle at full height Machine operating weight LOADER SPEED Raising time...

Open the catalog to page 11
Wheel Loaders W110C - W130C - 12

PARTS AND SERVICE The New Holland dealer network is, in itself, the best guarantee of continued productivity for the machines it delivers to its customers. New Holland service technicians are fully equipped to resolve all maintenance and repair issues, with each and every service point providing the high standards they are obliged to observe under New Holland's stringent quality guidelines. The New Holland global parts network ensures fast, reliable, replacement parts for less downtime, increased productivity and, of course, profitable operation for its customers. AT YOUR OWN DEALERSHIP The...

Open the catalog to page 12

All New Holland catalogs and technical brochures

  1. WHEEL LOADERS

    20 Pages

  2. CR Revelation

    48 Pages

  3. CX7 & CX8

    44 Pages

  4. CULTIVATORS

    24 Pages

  5. Landscape

    20 Pages

  6. SSL - CTL

    32 Pages

  7. E10 SR

    2 Pages

  8. E16B, E18B

    8 Pages

  9. WE150B Pro

    24 Pages

  10. E245C

    24 Pages

  11. LM732

    2 Pages

  12. E18SR

    6 Pages

  13. E55BSR

    2 Pages

  14. E385C, E485C

    28 Pages

  15. E215LC

    3 Pages

  16. E265C, E305C

    28 Pages

Archived catalogs