1. Catalogs
  2. New Elfin
  3. 090 CONTACTORS, RELAYS AND MOTOR CIRCUIT BREAKERS
video corpo

090 CONTACTORS, RELAYS AND MOTOR CIRCUIT BREAKERS

090 CONTACTORS, RELAYS AND MOTOR CIRCUIT BREAKERS
1 / 63 PagesView full catalog

090 CONTACTORS, RELAYS AND MOTOR CIRCUIT BREAKERS

Product catalog summary
Introduction
The document introduces a new line of contactors by NEW ELFIN, highlighting their modularity, cost-effectiveness, and ease of installation. These contactors are compact, efficient, and durable, with a mechanical life of 25 million cycles and an electrical life of 2.5 million cycles, making them globally competitive.

Specifications
The contactors are electromechanical devices designed for numerous operations, capable of handling currents under normal and overload conditions. Selection criteria include usage categories, electrical life, and operations per hour.

Utilization Categories
Various utilization categories are outlined, such as AC-1 for non-inductive loads, AC-3 for squirrel cage motors, and AC-5a for fluorescent lamp control, each with specific operational conditions.

Fluorescent and Mercury Vapor Lamp Control
For fluorescent and mercury vapor lamps, contactors should be selected based on making current, which can be significantly higher than nominal current due to capacitor charging.

Conclusion
The document emphasizes the importance of understanding utilization categories and operational requirements for optimal contactor performance and longevity.
Specifications:
Performance specifications for minicontactors, thermal relays, and motor starters are detailed, including maximum nominal power ratings for different voltage levels.

Procedures:
Instructions for mounting and wiring are provided, with diagrams for direct mounting of thermal overload relays to minicontactors.

Standards and Compliance:
Components comply with UL/CSA standards, ensuring safety and reliability.

Recommendations:
Recommendations include the use of surge suppressor units and mechanical interlocks to enhance system performance and safety.

Key Data from Tables and Diagrams:
Tables list setting ranges for thermal relays, coil voltage options, and auxiliary contact configurations, along with electrical characteristics.

General Characteristics:
Components have a rated voltage up to 690V, frequency of 50/60 Hz, and protective functions like phase failure and overload protection.

Accessories:
A range of accessories and spare parts are listed, including coils and mounting adapters, with details on auxiliary contacts.
Auxiliary Contacts:
Front and side mounting auxiliary contacts are available in various configurations, with specific product codes and weights.

Accessories:
Shunt and undervoltage releases are available for side mounting, supporting various voltage ranges.

Combination Units:
Manual motor starters and contactors are available in various combinations, with specific product codes.

Sections and Units:
Sections for 32A, 63A, and 100A are detailed with specific mounting and connection units.
See more

Catalog excerpts

090 CONTACTORS, RELAYS AND MOTOR CIRCUIT BREAKERS-2

CONTATTORI, RELÈ TERMICI, MINI CONTATTORI, INTERRUTTORI SALVAMOTORE 090 CONTATTORI, RELÈ TERMICI, MINI CONTATTORI, INTERRUTTORI SALVAMOTORE CONTACTORS, THERMAL O/L RELAYS, MINICONTACTORS, MANUAL MOTOR STARTERS

 Open the catalog to page 2
090 CONTACTORS, RELAYS AND MOTOR CIRCUIT BREAKERS-3

CONTATTORI, RELÈ TERMICI, MINI CONTATTORI, INTERRUTTORI SALVAMOTORE Nuova linea di contattori New line of contactors NEW ELFIN proposes a new line of La NEW ELFIN propone una nuova linea di contattori caratterizzati da una estrema N contactors, characterized by an exceptional modularity. The wide range of accessories modularità. L’ampia gamma di accessori in comune alle differenti taglie di potenza permette di in common among different power sizes, allow you gestire il lavoro in modo più funzionale e ottimizzare to work in a more functional way optimizing costs and time. i costi al contrario...

 Open the catalog to page 3
090 CONTACTORS, RELAYS AND MOTOR CIRCUIT BREAKERS-4

CONTATTORI, RELÈ TERMICI, MINI CONTATTORI, INTERRUTTORI SALVAMOTORE Layout Layout

 Open the catalog to page 4
090 CONTACTORS, RELAYS AND MOTOR CIRCUIT BREAKERS-5

CONTATTORI, RELÈ TERMICI, MINI CONTATTORI, INTERRUTTORI SALVAMOTORE Layout Layout Utilizzo a parità di dimensioni Utilizzo a parità di dimensioni Contactors with same dimensions Contactors with same dimensions

 Open the catalog to page 5
090 CONTACTORS, RELAYS AND MOTOR CIRCUIT BREAKERS-6

CONTATTORI, RELÈ TERMICI, MINI CONTATTORI, INTERRUTTORI SALVAMOTORE Introduzione Introduction La norma definisce il contattore come un dispositivo elettromeccanico di manovra, generalmente previsto per un numero elevato di manovre, avente una sola posizione di riposo, ad azionamento non manuale, in grado di stabilire, portare e interrompere correnti in condizioni normali del circuito, incluse le condizioni di sovraccarico e manovra. La forza per la chiusura dei contatti principali normalmente aperti o per l’apertura dei contatti normalmente chiusi è fornita da un elettromagnete. Nelle pagine...

 Open the catalog to page 6
090 CONTACTORS, RELAYS AND MOTOR CIRCUIT BREAKERS-7

CONTATTORI, RELÈ TERMICI, MINI CONTATTORI, INTERRUTTORI SALVAMOTORE Categorie d'impiego Utilization categories La normativa stabilisce delle categorie di utilizzazione riferite ad impieghi ben precisi dei contattori. Tali categorie sono riportate nella tabella seguente. The standard establishes several categories of use referred to precise uses of contactors. These categories are listed in the following table. Carichi non induttivi o debolmente induttivi, forni a resistenza Non inductive or slightly inductive loads, resistance furnaces Motori a gabbia: avviamento, arresto del motore durante la...

 Open the catalog to page 7
090 CONTACTORS, RELAYS AND MOTOR CIRCUIT BREAKERS-8

CONTATTORI, RELÈ TERMICI, MINI CONTATTORI, INTERRUTTORI SALVAMOTORE Categorie d'impiego Utilization categories Categoria Category Minimi (50 cicli) Minimum (50 cycles) Ordinari (6000 cicli) Standard (6000 cycles) Inserzione / Making Interruzione / Making Inserzione / Making Interruzione / Making Questa categoria prevede inserzione, mantenimento e disinserzione di una data corrente nominale. Quindi oltre al comando di carichi ohmici, questa categoria può essere utilizzata per carichi elettricamente equivalenti quali softstarters ed inverter (contattore di linea manovra a vuoto) e nella distribuzione...

 Open the catalog to page 8
090 CONTACTORS, RELAYS AND MOTOR CIRCUIT BREAKERS-9

CONTATTORI, RELÈ TERMICI, MINI CONTATTORI, INTERRUTTORI SALVAMOTORE Categorie d'impiego Utilization categories FLUORESCENT LAMP CONTROL COMANDO LAMPADE A FLUORESCENZA Nelle lampade a fluorescenza non rifasate la corrente d’inserzione è circa due volte la corrente nominale del circuito con tempi di accensione fino a 10s. Il contattore va scelto con lnom. in AC 1 moltiplicata per un fattore pari a 1,3 o 1,4. Nelle lampade a fluorescenza rifasate la presenza del condensatore riduce il tempo di accensione a pochi secondi ma si ha una corrente d’inserzione pari a 20 volte la corrente nominale del...

 Open the catalog to page 9
090 CONTACTORS, RELAYS AND MOTOR CIRCUIT BREAKERS-10

CONTATTORI, RELÈ TERMICI, MINI CONTATTORI, INTERRUTTORI SALVAMOTORE Categorie d'impiego Utilization categories Corrente nominale Nominal current 100V Lampada con basso/alto cos 100V Lamp with low/high cos 200V Lampada con basso/alto cos 200V Lamp with low/high cos SEZIONI / SECTIONS COMANDO LAMPADE A VAPORI DI SODIO SODIUM VOPOUR LAMP CONTROL Sono lampade con tempi di accensione fino a 5 min. con una corrente d’inserzione pari a 1.7-2.2 volte la corrente nominale del circuito. Il contattore va scelto in AC 1 pari alla corrente d’inserzione. Es.: Im circ. = 20A I contattore = 20A * 2.2 = 44A 090C32...

 Open the catalog to page 10
090 CONTACTORS, RELAYS AND MOTOR CIRCUIT BREAKERS-11

CONTATTORI, RELÈ TERMICI, MINI CONTATTORI, INTERRUTTORI SALVAMOTORE Categorie d'impiego Utilization categories TRASFORMER CONTROL COMANDO DI TRASFORMATORI L’inserzione di trasformatori è contraddistinta da un picco d’inserzione che può arrivare fino a 30 x ln dovuto ad un elevato assorbimento di correnti magnetizzanti. Ovviamente nel dimensionamento del contattore occorre che il potere d’interruzzione sia ≥ alla corrente d’inserzione. Questa tabella è applicabile quando la corrente d’inserzione è inferiore a 20 In circuito. Monofase Mono phase The connection of transformers is distinguished by...

 Open the catalog to page 11
090 CONTACTORS, RELAYS AND MOTOR CIRCUIT BREAKERS-12

CONTATTORI, RELÈ TERMICI, MINI CONTATTORI, INTERRUTTORI SALVAMOTORE Categorie d'impiego Utilization categories CAPACITORS CONTROL COMANDO DI CONDENSATORI L’utilizzo dei condensatori negli impianti di rifasamento è caratterizzato da picchi di corrente che il carico capacitivo impone alla rete all’atto dell’inserzione. Si possono comandare condensatori singoli o batterie. Nel caso di più di una batteria di condensatori i singoli gradini vengono inseriti in parallelo uno con l’altro, si ha così una sorgente addizionale di energia dovuta al trasferimento di energia della batteria sotto tensione a...

 Open the catalog to page 12
090 CONTACTORS, RELAYS AND MOTOR CIRCUIT BREAKERS-13

CONTATTORI, RELÈ TERMICI, MINI CONTATTORI, INTERRUTTORI SALVAMOTORE Categorie d'impiego Utilization categories Poli in serie Corrente impiego Poles Rated operational current in series Ie [A] DC-1 SEZIONI / SECTIONS 2 poli in serie 2 poles in series Corrente impiego Rated operational current Ie [A] DC-3 / DC-5 3 poli in serie 3 poles in series

 Open the catalog to page 13
090 CONTACTORS, RELAYS AND MOTOR CIRCUIT BREAKERS-14

CONTATTORI, RELÈ TERMICI, MINI CONTATTORI, INTERRUTTORI SALVAMOTORE Sezioni 9-12-18-22 9-12-18-22 sections Contattore / Contactor Contatto ausiliario1NO + 1NC integrato nel contattore / Auxiliary contact 1NO - 1NC integrated in the contactor Sezione 9A / 9A Section 24V - 50/60 Hz Tensioni di comando / Coil voltage 230V - 50/60 Hz Tensioni di comando / Coil voltage 400V - 50/60 Hz Tensioni di comando / Coil voltage Prestazioni secondo IEC-60947 Perfomance in accordance with IEC-60947 Prestazioni secondo UL/CSA Perfomance in accordance with UL/CSA Potenza nominale massima / Maximum nominal power...

 Open the catalog to page 14
*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.