XP-703D - suction type portable gas detector
1Pages

{{requestButtons}}

Catalog excerpts

XP-703D - suction type portable gas detector - 1

Toxic Gas Detectors Gas leak detector for semiconductor manufacturing gases Type of Gas Detected Detection Principle Hot wire semiconductor sensor Best suited for detecting trace leaks of semiconductor manufacturing gases. Detects gas leaks and alerts you by lamp and buzzer. Model Detection Principle Sampling Method Gas Detected Minimum Detectable Leak rate Minimum Detectable Concentration Response Time Detection Indication Power Source Battery Life Operating Temperature Dimensions Weight Standard Accessories Optional Acessoriess XP-703D Hot wire semiconductor Extractive Semiconductor manufacturing gases (arsine, phosphine, diborane, silane, etc.) arsine phosphine diborane silane hydrogen AsH3 PH3 B2H6 SiH4 H2 1.0×10-7 10s or less Intermittent buzzer and ashing lamp 4× AA (R6) manganese dry cells Up to 9 hours by alkaline dry cells (Up to 3 hours by manganese dry cells) 0 to 40 W68 × H155 × D32mm Approx. 400g Soft case, Probe with lter/moisture trap, Check gas, Standard attachment, 4× AA (R6) manganese dry cells, Spare lters Earphone Multi-Gas Detectors COSMOS Personal Gas Monitor XX-2200 Series Carbon monoxide/Oxygen detector Type of Gas Detected Detection Principle Electrochemical cell sensor Can be used continuously for 5000 hours. Available with loud buzzer, alarm lamp from 4 dimensions, and peak hold function. Available with TWA (Time Weighted Average) gas concentration display, memory of peak value, and peak hold function. Available with gas calibration kit (Optional) Model Gas Detected Detection Principle Sampling Method Measuring Range (Service Range) XOC-2200 Oxygen (O2) Galvanic cell Diffusion Indication Accuracy *1 Within Alarm Set Value Response Time *2 20s or less LCD (Manual backlight) Display Mode Buzzer sounds, ashing red light, vibrator Alarm Mode Remaining battery level, peak hold, peak value memory, readout of time weighted average, remaining battery level, alarm functions except gas alarm (time weighted Functions average, sensor malfunction, battery level, zero-adjustment malfunction), gas calibration, gas concentration indication 10 to 40 , 30-90% RH (non-condensing) Operating Temperature Operating Air Pressure Air pressure 10% Power source *3 1 × AAA alkaline dry cell Up to 5,000 hours (at 20 with less than 20ppm) Battery Life W65 × D22 × H64mm (excluding protrusions) Dimensions approx. 75g (including battery) Weight Standard Accessories 1 × AAA alkaline dry cell, 1 × safety pin adaptor (with xing screw) *1 Under identical measuring conditions. *2 Operating at 20 2 . *3 Battery life may vary with ambient conditions, conditions of use, storage period, battery manufactures, etc.

Open the catalog to page 1

All New Cosmos catalogs and technical brochures

  1. KS-7R

    2 Pages

  2. SH-4004-WAD

    1 Pages

  3. SH-4002-WAD

    1 Pages

  4. SH-4001-WAD

    1 Pages

  5. PS-7

    1 Pages

  6. KD-12A

    4 Pages

  7. SDM-72/73

    1 Pages

  8. New Energy

    2 Pages