SH-2001-WAD Multi Gas Sampler Suction type Detector integrated alarm handling & decomposer Observer TM Part # 13101 Detector model SH-2001-WAD Gas Sensor type GS-[ ]HA/ES/MS/KTSS/HSR/HSC/ PID Optional Target gas According to the TG availability list Monitoring configuration Continuous, single point, extractive. Maximum four (2) sensors in line. Detection Principle E-Chem, IR, Zirconium Cat.beat, PID & CEC technique1) Decomposer filament type 841A/ 841B (depending on TG) Number of gas inlets / outlets 1 Output signal 4-20 mA, 2 wire screened Accuracy +/- 5% 2) Alarm levels 4. Matrix programmable output relays card optional for: Alarm1, Alarm2, Error & Warning. Communication interfaces RS-232; configuration and diagnostics ( RJ-45 connector). Optional plugin modules: RS-485; Profibus DP & MODBUS, RS-485; SIMS Indicator Please refer to the section sensor overview for the gas names and measuring ranges TG = Toxic Gas number 140 x 32 dot matrix; blue VF display Sampling pump Long life DC operated diaphragm pump Flow control Optical/ electronic Operating temp. 0 - 40° C ; 32 - 104° F Operating humidity 5 % - 95% (non condensing) Installation Indoor, wall-mount Tube connectors In & out; 1/4 “ NPT Female Power requirements 24 Volts DC Power consumption (max.) 18 Watt Dimensions (approx.) (WxHxD) 164x330x184 mm Weight (approx.) 4.5 KG 1) Combined Electrochemical Cell (CEC technique); an electrochemical sensor combined with a decomposer unit. 2) Final accuracy is related to the calibration mixture. Eur63-CAT-v15_rev1 04-2011© 2011, Bionics Instrument Europe B.V. All rights reserved -11-