Patch Panels
20Pages

s u p e r i o r q u a l i t y Introduction Patch Panels are central switching gears between audio equipments. They are used to switch and route analog and digital audio signals from and to equipments in recording or broadcast studios, OB vans, churches, theatres, stadiums, arenas, etc. Neutrik® Patch Panels are available in a varety of jack types, wiring and grounding possibilities. Common versions accommodating Bantam TT, 1/4“ A-gauge and longframe B-gauge jacks on the front rows are available. The mechanical size is designed to fit into 1U 19“ standard racks. All Neutrik Patch Panels...

N P P A Robust front design Easy assembly S e r i e s Jack-pair N P PA - S e r i e s IDC terminals - Push terminals ELCO connectors 96 Bantam (TT) Jacks NPPA-TT-PT • Innovative and compact patching system (just 1U high) for 19“ rack mounting • Robustly housed in a black coated steel shell • Features 2 x 48 long life gold plated TT size (bantam) Neutrik NJ3TTA double contact point TRS jacks • Available in all common normalling configurations (default Half Normalled Bottom) • Qualified for analog and digital signals according to AES3, 48 kHz sampling frequency • Remove the front panel for...

N P P A S e r i e s Design Criteria All NPPA patch panels are fitted with high quality, long life NJ3TTA gold plated double contact jacks (2x48), featuring best contact integrity. The unit, robustly housed in a black coated steel shell, is finished off with a built in cable bar and two large channel identification strips for perfect management of the system. The NPPA patch panels are an innovative and compact patching system (just 1U high) for 19" rack mounting. Configuration The standard version of the NPPA Panel is delivered bottom row half normalled for each jack pair by default. Further...

NPP-TB Series individual colour Galvanized meta coding housing • Features 2 x24 Neutrik" NJ6TB-V long frame 1/4" TRS jacks according to BP0316/MIL-P-642/2 • Very robust and compact galvanized metal housing • Compact, cost effective system qualified for both analog and digital signals acc. AES3, 48 kHz sampling frequency • High quality long life gold plated Neutrik jacks • Easily programmable for any of 6 configurations with 4 grounding choices • Rear terminations include solderless terminal blocks or solder lugs (solder for non-programmable half-normalled versions only). • Center marking...

N P P - T B S e r i e s Design Criteria The NPP-TB patch panels are equipped with gold plated, high quality long life NJ6TB-V Jacks for BPO/MIL style plugs. The panels are easily programmable for six switching configurations and offer a flexible grounding system. The NPP-TB patch panels are very robust and compactly designed for 19" rack mount (19" x 1U) with galvanized metal housing and a built-in cable bar on the rear for securing wires. There is a rear extension bar (NPP-S) available as an option. On the front side there is an attractive additional lettering area for each channel pair...

N Y S Ruggedized metal housing Imprinted grounding instruction S e r i e s Module NYS-SPCR1 1/4" Patch Panel NYS-SPP-L1 • Individual grounding available for each channel separately • Ruggedized metal housing • Improved contact design minimises wear on mated plugs • Economic and versatile designed 1/4" modular Patch Panel with 2 rows of jack sockets • 48 balanced channels with fully PCB wired jack (24 vertical PC boards), 24 front pairs and corresponding 24 rear pairs • Jack PC card contains 4 balanced 1/4" jacks with non-tarnishing contacts, is held securely in place without the use of nuts...

N Y S S e r i e s Design Criteria The PCBs are held securely in place by being clamped between the front and the rear panel, this grants an easy reconfiguration of the Patch Panel without the danger of loosing any small parts (e.g. nuts). The grey jack serves as an easy and distinguishable normalling identification. The NYS-SPP-L1 is a economical and remarkable sleek designed 1/4“ modular Patch Panel for 19“ rack mount (19“ x 1U) with a reinforced metal housing. Each of it‘s 48 PCB wired balanced channels (24 front pairs and corresponding 24 rear pairs) can either be grounded separately or...

B a n t a m Standard 4.4mm bantam jack P a t c h P a n e l s Long frame jack socket MA 96 and XPM 96 Bantam Patchbays • Robust designed patchbay to accept standard 4.4 mm Bantam jack connectors (acc. MIL-D-642/13) • Fitted with 96 Rean die-cast jack sockets • Constructed from rigid aluminium extrusion which includes 2 integral slots for designation strips • 96 channels grouped in two row 12 x 8 stereo jacks • XPM96 features traditional 2 row, 4 x 24 stereo jacks • Available in 4 colours: black, silver, red or blue • Suitable for audio, broadcast, data and industrial applications XPM96...

B a n t a m Die-cast frame P a t c h P a n e l s Tinned tags MAJ 501 Bantam Jack Socket • 5-point Bantam jack socket (Tip, Ring, Sleeve, Tip Normal, Ring Normal) • Rigid nickel plated die-cast frame, featuring considerable frame strength eliminating physical distortion when plug is inserted • Nickel-silver spring contacts, palladium plated switch contacts • Tinned tags for easy soldering Termination End Elevations Plan Elevations Circuit Detail www.neutrik.com 155

L o n g f r a m e B-Gauge patchbay B - G a u g e P a t c h 48 way longframe LF 48 B-Gauge Patchbays • 48 way Longframe B-Gauge patchbay • Accepts both European BPO 316 and US MIL-P-642/2 style phono plugs • 2 rows of 24 LF501 jack connectors • Jack designed from rigid nickel-plated die-cast aluminium with nickel-silver spring contacts • Available in 4 colours: black, silver, red or blue • Reliable support for connecting looms by steel lacing bar Dimensional Drawing 156 innovative solutions I superior quality P a n e l s