Website:
NEURTEK
Catalog excerpts
neurtek"! instruments Density / Pictometeryour quality control instruments provider Application This is a stainless steel or anodized aluminium precision instrument to determine the specific weight of paints and similar products. This device consists of a container and a lid with an orifice for excess tested liquid. It is available in two capacities: 50 or 100 cc, with or without tare for balanced measurements. Usage 1.-Determine the weight of a clean flask in grams. As an alternative the flask can be provided with an exact tare weight to be used with laboratory scales. 2.-Remove the top and fill the container at 1/10 inches from the edge with the material that is going to be tested. 3.-Put the top back on carefully in order to expel air and excess material through the ventilation hole. 4.-Rub the top clean to eliminate excess material and reweigh. By subtracting the original weight of the flask, the weight of the content can be determined. If tare weight is used at the beginning, the scale will indicate the weight of the content. 5.-Clean thoroughly immediately after using. Certificates of Calibration SER-CT045 Certificate of Calibration with traceability*. How to order Stainless Steel Models Note: * Included where indicated and optional in the others. NEURTEK S.A. SE RESERVA EL DERECHO DE MODIFICACION SIN PREVIO AVISO.
Open the catalog to page 1All NEURTEK catalogs and technical brochures
-
RHOPOINT INSTRUMENTS NEURTEK14 Pages
-
LTL3000 retroreflectometer2 Pages
-
RHOPOINT NOVO-GLOSS11 Pages
-
MetaVue VS32002 Pages
-
Moisture Meters16 Pages
-
NKG Glossmeters5 Pages
-
Flow Timer NK11002 Pages
-
Film Applicators2 Pages
-
ATX Automatic Applicator1 Pages
-
Sikkens NK3000 Scratch Tool1 Pages
-
Hardness Test Kit1 Pages
-
Pencil Hardness Tests1 Pages
-
Cupping Tester1 Pages
-
Cross Cut tester NK20001 Pages
-
Wet Film Thickness Gauge1 Pages
-
Wet Film Thickness Gauge WG1 Pages
-
Paint and Coatings88 Pages
-
Impact tester for paint2 Pages
