Catalogs >
NEURTEK >
Multifunctional Master Paint Plate

Multifunctional Master Paint Plate
2Pages

Catalog excerpts

Adhesion Multifunctional Master Paint Plate Application The multifunctional Paint Plate is a very practical instrument for users, inspectors and professionals in the coating field. Fresh film thickness from 50 to 500 microns. ISO 2808. Progressive film applicator from 0 to 2000 microns. Can be used for a 1, 1.5, 2, 3mm pane adhesion test according ISO 2409 and ASTM D 3359 (X-cut) Andreas cross. Leveling test that provides an orientation of the viscosity of the coating Complies with the following standards ISO 2808, ISO 2409, ASTM D 3359. Central area: Cross cut adhesion test, St Andrew´s cross adhesion test Ranuras de guía de cuchillas paralelas de 6x1 y 6 x 1.5mm. Corta la capa solamente hasta el sustrato. 1mm para capas hasta 60 µ, 2 mm para capas hasta 120 µ, 3 mm para capas de 120 µ a 250µ y 1.5mm para aplicaciones especiales. Side areas: Wet film thickness gauge Upper area: Leveling NEURTEK S.A. SE RESERVA EL DERECHO DE MODIFICACIÓN SIN PREVIO AVISO. This pocket sized instrument allows to check the following parameters: Bottom area: progressive film applicator

Open the catalog to page 1

Adhesion Multifunctional Master Paint Plate Technical specifications Adhesion Test results classification GT 0 GT 1 Separation of small layer spalling at the intersection of the cuts. A cross-sectional area not considerably larger than 5% is affected. GT 2 The layer has peeling along the edges and/or at the intersections of the cuts. A cross-sectional area significantly larger than 5% but not significantly larger than 15% is affected. GT 3 The layer has chipped along the edges of the cuts partially or completely on large ribbons, and/or has chipped partially or completely on the different...

Open the catalog to page 2

Multifunctional Master Paint Plate 2Pages

Catalog excerpts

All NEURTEK catalogs and technical brochures

Multifunctional Master Paint Plate
2Pages