Fineness of Grind Gauges 15,25, 50 and 100 microns Hegman Precision Grindometer
3Pages

neurtek"! instruments Fineness of Grind Gauges15,25, 50 and 100 microns Hegman Precision Grindometer Aplicacion This instrument is intended for measuring the thinness of ground paints. It is also used in food (f.e..: chocolate) and pharmaceutical (creams) industries. General features • Consists of a hardened and gauged part, which makes it more economic, lighter and smaller. • It is delivered with a hardened scraper, in a practical leather case. • Elimination of the notches for the scale that used to be necessary. The scale is not part of the measuring surface anymore, but rather electrically inscribed in the sides. This makes cleaning simpler, it is sufficient to use a cloth, and the readjustment is easier and cheaper, when the measuring surface is worn. • It is made of corrosion resistant steel. Greasing or special care is not necessary, so it can also be used in watery agglutinating agents. • All the executions also have the graduation in Herman-NS scale, which prevents wrong indications of the grain. • Good value for money, it features two slots, so that by measuring a single sample a double determination can be achieved. • INTA's version is excluded. This model only has one measuring slot, but it is equipped with three scales, in NS, in pm and in mils. The NS scale is found in the measuring surface, close to the slot. • In addition to the graduation according to NSA, the scale FPVPC can also be used. In the chart on the back the connections between the different units are shown. • The paints that are insufficiently ground form films that are not clear, with lack of brightness and poor protective force. • Grinding is expensive; therefore it must not take any longer than necessary. • The most economically convenient grinding procedure must be determined for each product. • In order to set the grinding elements to the most effective and favourable grade. • Comparison of the grinding effect, between pigments of the same nature, but different origin, in the same conditions. • Determining of the grinding grade of foreign products. • Outgoing quality control in paints factories. • Incoming quality control for paints consumers. • To sum up: "Rationalization of the production and quality control to avoid complaints". NEURTEK S.A. SE RESERVA EL DERECHO DE MODIFICACION SIN PREVIO AVISO.

neurtek"! instruments Fineness of Grind Gauges15,25, 50 and 100 microns Hegman Precision Grindometer Usage Some drops of the product to be tested are poured into the deepest part of the slots, and with the scratch, maintaining it slightly oblique; the paint is collected, extending it to the ends of the slots, with the minimum adjustment. Immediately after having made the extension, the result of the measurement in the scale NS o FPVPC is displayed in the place that is marked in figure 3. To do so, the grindometer must be held at eye-level, looking at the place of the measurement, obliquely,...

neurtek"! instruments Fineness of Grind Gauges15,25, 50 and 100 microns Hegman Precision Grindometer 0236300 ZPEX018 Certificate of Calibration with traceability. NEURTEK S.A. SE RESERVA EL DERECHO DE MODIFICACION SIN PREVIO AVISO. The codes go depending on the model, according to the attached charts.