Digital Resistivitimeter RE45

Product catalog summary

Application
The Digital Resistivimeter RE-45 is designed to measure the resistivity of paints, varnishes, and liquids quickly and accurately. It is essential for the proper functioning of electrostatic paint installations, helping to save paint and reduce waste.

Operating Standards
The device operates according to ASTM D 5682-95 standards.

Technical Specifications

Range: 100 Kohm – 20,000 Kohm (20 Mohm)
Precision:
- 0.1 – 0.5 MΩ = ± 3%
- 0.5 – 5.0 MΩ = ± 1%
- 5.0 – 10.0 MΩ = ± 2%
- 10.0 – 20.0 MΩ = ± 3%
Display: LCD
Dimensions: Equipment - 100 x 200 x 30 mm; Probe - 230 mm x 42 mm
Battery: 1 x 9V
Measuring Signal: 45V
Model: Digital
Low Battery Indicator: Yes

Usage Instructions
To use, switch on the equipment, insert the probe into the paint, press the "START" button, and the resistivity value will display after approximately 10 seconds. The device features auto-scaling for measuring the full range of resistivity without changing the procedure.

Equipment Equivalences in Electrostatic Application
The document provides a table comparing resistivity values in Megaohms and K-OHMS across different equipment brands like NESAG, STRATON-SAMES, VOLSTATIC, HURSANT, and RANSBURG.

Certificated Calibrations
Optional certificated calibration with traceability is available under SER-CT007.

Ordering Information
Reference for ordering: 0200600 Digital Resistivimeter RE-45.

Catalog excerpts

neurtek"! instruments Digital Resistivimeter RE-45your quality control instruments supplier NEURTEK S.A. ALL RIGHTS RESERVED. TECHNICAL DATA SUBJECT TO CHANGE WITHOUT NOTICE. Application Equipment developed to measure the resistivity of paints, varnishes and liquids in a fast and precise way. Indispensable for the correct functioning of electrostatic paint installations. It helps saving paint and reducing paint waste. Operating standards Technical Specifications Easy to use Switch on the equipment, and introduce the probe into the paint Press measuring bottom " START ", and after 10 secons aprox the resistivity value is in the display The equipment has an inside Autoescaling, which allow to measure all range of resistivity without changing the reading procedure.

Open the catalog to page 1

neurtek"! instruments Digital Resistivimeter RE-45your quality control instruments supplier Equipments equivalences in Electroestatic application NEURTEK S.A. ALL RIGHTS RESERVED. TECHNICAL DATA SUBJECT TO CHANGE WITHOUT NOTICE. Certificated Calibrations (optional) SER-CT007 Certificated Calibration, with traceability. Ordering Reference: 0200600 Digital Resitivimeter RE-45.

Open the catalog to page 2

All NEURTEK catalogs and technical brochures

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list