Catalog excerpts
WPLQE Economy Line WPLQE The right angle planetary gearbox with universal output flange – flexible installation options and for high forces The WPLQE is our right angle gearbox with the square output flange. This makes it particularly easy to install for a wide range of applications, and its large deep groove ball bearings also make it ideal for high radial and axial forces. Nominal output torque Radial force Axial force Torsional backlash Protection class Frame sizes
Open the catalog to page 1WPLQE Economy Line Economy Line Right angle gearbox Equidirectional rotation Spur gear Bevel gear right angle stage Square type output flange Reinforced deep groove ball bearings High ratio variety i=3 up to i=512 Planet carrier in disc design Detailed explanations of the technical features starting on page 169.
Open the catalog to page 2Technical data Code Gearbox characteristics Service life (L10h) Protection class Standard lubrication Food grade lubrication Grease (lifetime lubrication) Grease (lifetime lubrication) Grease (lifetime lubrication) Installation position Standard backlash Nm /arcmin (lbf.in/ arcmin) Standard surface Running noise(4) Max. bending moment based on the gearbox input flange(5) Output shaft loads Number of stages The ratio-dependent values can be retrieved in Tec Data Finder – www.neugart.com Tmin = -40°C. Optimal operating temperature max. 50°C Sound pressure level from 1 m, measured on input...
Open the catalog to page 3Technical data Output torques Ratios (i=n1/n2) Number of stages Application specific configuration with NCP – www.neugart.com Values for feather key (code “A”): for repeated load Different service life: 10,000 h at T2N 30,000 rotations of the output shaft permitted; see page 158
Open the catalog to page 4Technical data Output torques Emergency stop torque Average thermal input speed at T2N and S1(4)(5) Input speeds Ratios (i=n1/n2) Number of stages Permitted 1000 times Application-specific speed configurations with NCP – www.neugart.com See page 158 for the definition Average thermal input speed at 50% T2N and S1
Open the catalog to page 5Drawing corresponds to a WPLQE080 / 1-stage / output shaft with feather key / 19 mm clamping system / motor adaptation – 2-part – square universal flange / B5 flange type motor (1) The dimensions vary with the motor/gearbox flange. The input flange dimensions can be retrieved for each specific motor in Tec Data Finder at www.neugart.com Pitch circle diameter output Mounting bore output Shaft diameter output Shaft collar output Centering diameter output Housing diameter Diagonal dimension output Flange cross section output Shaft length output Total length Centering depth output Flange...
Open the catalog to page 6All Neugart GmbH catalogs and technical brochures
-
Precision Gearbox Catalog
174 Pages
-
NCP 4.3
2 Pages
-
Neugart HLAE
12 Pages
-
Neugart NGV
10 Pages
-
Neugart PLHE
8 Pages
-
Neugart WGN
6 Pages
-
Neugart PFHE
6 Pages
-
Neugart PLFN
6 Pages
-
Neugart WPLN
6 Pages
-
Neugart WPSFN
6 Pages
-
Neugart PSFN
6 Pages
-
Neugart PLN
6 Pages
-
Neugart PSN
6 Pages
-
Neugart PSBN
6 Pages
-
Neugart WPLFE
6 Pages
-
Neugart WPLPE
6 Pages
-
Neugart WPLE
6 Pages
-
Neugart PLFE
6 Pages
-
Neugart PLHE
6 Pages
-
Neugart PLPE
6 Pages
-
Neugart PLQE
6 Pages
-
Neugart PLE
6 Pages
-
NGV
10 Pages