WPLPE Economy Line WPLPE The economical right angle planetary gearbox for particularly high forces – flexible installation options and lifetime lubrication The WPLPE is the smart right angle solution from our Economy Line: Space-saving, and yet powerful at an attractive price. You install your drive elements directly on the output shaft and extract the maximum flexibility from your application. Nominal output torque Radial force Axial force Torsional backlash Protection class Frame sizes

WPLPE Economy Line Economy Line Right angle gearbox Equidirectional rotation Spur gear Bevel gear right angle stage Round type output flange Reinforced deep groove ball bearings Planet carrier in disc design Detailed explanations of the technical features starting on page 169.

Technical data Code Gearbox characteristics Service life (L10h) Service life at T2N x 0,88 Efficiency at full load(2) Standard lubrication Grease (lifetime lubrication) Food grade lubrication Grease (lifetime lubrication) Grease (lifetime lubrication) Nm /arcmin (lbf.in/ arcmin) Standard backlash Standard surface Running noise(4) Max. bending moment based on the gearbox input flange(5) Output shaft loads Radial force for 20,000 h Moment of inertia Mass moment of inertia(2) Protection class Number of stages The ratio-dependent values can be retrieved in Tec Data Finder – www.neugart.com Tmin =...

Technical data Output torques Ratios (i=n1/n2) Number of stages Application specific configuration with NCP – www.neugart.com Values for feather key (code “A”): for repeated load Different service life: 10,000 h at T2N 30,000 rotations of the output shaft permitted; see page 158

Technical data Output torques Input speeds Average thermal input speed at T2N and S1(4)(5) Ratios (i=n1/n2) Number of stages Permitted 1000 times Application-specific speed configurations with NCP – www.neugart.com See page 158 for the definition Average thermal input speed at 50% T2N and S1

Drawing corresponds to a WPLPE090 / 1-stage / output shaft with feather key / 19 mm clamping system / motor adaptation – 2-part – square universal flange / B5 flange type motor The dimensions vary with the motor/gearbox flange. The input flange dimensions can be retrieved for each specific motor in Tec Data Finder at www.neugart.com Pitch circle diameter output Shaft diameter output Shaft collar output Centering diameter output Housing diameter Total length Shaft length output Mounting thread x depth Centering depth output Motor shaft diameter j6/k6 Clamping system diameter input Output shaft...