PLQE Economy Line PLQE The easy to install planetary gearbox absorbs high forces with low heat generation Our PLQE is uncomplicated and powerful. It can be connected directly to your installation without the need for an intermediate flange. The large deep groove ball bearings at the output can absorb large axial and radial forces. In the process, only little heat is generated, so reliable operations are assured even in complex production cycles. Nominal output torque Radial force Axial force Torsional backlash Protection class Frame sizes

PLQE Economy Line Economy Line Coaxial gearbox Equidirectional rotation Spur gear Square type output flange Reinforced deep groove ball bearings High ratio variety i=3 up to i=512 Planet carrier in disc design Detailed explanations of the technical features starting on page 169.

Technical data Code Gearbox characteristics Protection class Standard lubrication Grease (lifetime lubrication) Food grade lubrication Grease (lifetime lubrication) Grease (lifetime lubrication) Installation position Standard backlash Nm /arcmin (lbf.in/ arcmin) Standard surface Running noise(4) Max. bending moment based on the gearbox input flange(5) Output shaft loads Number of stages The ratio-dependent values can be retrieved in Tec Data Finder – www.neugart.com Tmin = -40°C. Optimal operating temperature max. 50°C Sound pressure level from 1 m, measured on input running at n1=3000 rpm no...

Technical data Output torques Ratios (i=n1/n2) Number of stages Application specific configuration with NCP – www.neugart.com Values for feather key (code “A”): for repeated load 30,000 rotations of the output shaft permitted; see page 158

Technical data Output torques Input speeds Emergency stop torque Average thermal input speed at T2N and S1(4)(5) Ratios (i=n1/n2) Number of stages Permitted 1000 times Application-specific speed configurations with NCP – www.neugart.com See page 158 for the definition Average thermal input speed at 50% T2N and S1

Drawing corresponds to a PLQE080 / 1-stage / output shaft with feather key / 19 mm clamping system / motor adaptation – one part / B5 flange type motor (1) The dimensions vary with the motor/gearbox flange. The input flange dimensions can be retrieved for each specific motor in Tec Data Finder at www.neugart.com Pitch circle diameter output Mounting bore output Shaft diameter output Shaft collar output Centering diameter output Housing diameter Diagonal dimension output Flange cross section output 80,5 (3.169) Shaft length output Centering depth output Flange thickness output Motor shaft diameter...