PLPE Economy Line PLPE The cost effective planetary gearbox with the best torque-low heat performance Our PLPE unites the best properties of the Economy Line with a performance advantage. It is cost effective, yet powerful, and generates minimal heat. The optimized output bearing has been designed for high radial and axial forces. Nominal output torque Radial force Axial force Torsional backlash Protection class Frame sizes

PLPE Economy Line Economy Line Coaxial gearbox Equidirectional rotation Spur gear Round type output flange Reinforced deep groove ball bearings Planet carrier in disc design Detailed explanations of the technical features starting on page 169.

Technical data Code Gearbox characteristics Protection class Standard lubrication Grease (lifetime lubrication) Food grade lubrication Grease (lifetime lubrication) Grease (lifetime lubrication) Nm /arcmin (lbf.in/ arcmin) Standard backlash Standard surface Running noise(4) Max. bending moment based on the gearbox input flange(5) Output shaft loads Moment of inertia Mass moment of inertia(2) Number of stages The ratio-dependent values can be retrieved in Tec Data Finder – www.neugart.com Tmin = -40°C. Optimal operating temperature max. 50°C Sound pressure level from 1 m, measured on input running...

Technical data Output torques Ratios (i=n1/n2) Number of stages Application specific configuration with NCP – www.neugart.com Values for feather key (code “A”): for repeated load 30,000 rotations of the output shaft permitted; see page 158

Technical data Output torques Input speeds Average thermal input speed at T2N and S1(4)(5) Ratios (i=n1/n2) Number of stages Permitted 1000 times Application-specific speed configurations with NCP – www.neugart.com See page 158 for the definition Average thermal input speed at 50% T2N and S1

Drawing corresponds to a PLPE050 / 1-stage / output shaft with feather key / 8 mm clamping system / motor adaptation – one part / B5 flange type motor (1) The dimensions vary with the motor/gearbox flange. The input flange dimensions can be retrieved for each specific motor in Tec Data Finder at www.neugart.com Pitch circle diameter output Shaft diameter output Shaft collar output Centering diameter output Housing diameter Mounting thread x depth Housing length Shaft length output Centering depth output Motor shaft diameter j6/k6 Clamping system diameter input Output shaft with feather key (DIN...