PLFE Economy Line PLFE The shortest planetary gearbox with the highest torsional stiffness and flange output shaft There’s no such thing as too short: The PLFE is our planetary gearbox with compact flange output shaft. You save more than a third of the space and gain a significantly higher torsional stiffness. Due to its standardized flange interface, it is especially easy to install. The integrated dowel hole provides additional secureness during fitting. Nominal output torque Radial force Axial force Torsional backlash Protection class Frame sizes

PLFE Economy Line Economy Line Coaxial gearbox Equidirectional rotation Spur gear Extra large round type output flange Low-friction deep groove ball bearings Flange output shaft (ISO 9409) Planet carrier in disc design Detailed explanations of the technical features starting on page 169.

Technical data Code Gearbox characteristics Standard lubrication Food grade lubrication Grease (lifetime lubrication) Grease (lifetime lubrication) Grease (lifetime lubrication) Nm /arcmin (lbf.in/ arcmin) Standard backlash Standard surface Running noise(4) Max. bending moment based on the gearbox input flange(5) Output shaft loads Moment of inertia Mass moment of inertia(2) Protection class Number of stages The ratio-dependent values can be retrieved in Tec Data Finder – www.neugart.com Tmin = -40°C. Optimal operating temperature max. 50°C Sound pressure level from 1 m, measured on input running...

Technical data Output torques Ratios (i=n1/n2) Number of stages Application specific configuration with NCP – www.neugart.com 30,000 rotations of the output shaft permitted; see page 158

Technical data Output torques Input speeds Average thermal input speed at T2N and S1(4)(5) Ratios (i=n1/n2) Number of stages Permitted 1000 times Application-specific speed configurations with NCP – www.neugart.com See page 158 for the definition Average thermal input speed at 50% T2N and S1

Drawing corresponds to a PLFE090 / 1-stage / flange output shaft with dowel hole / 19 mm clamping system / motor adaptation – one part / B5 flange type motor (1) The dimensions vary with the motor/gearbox flange. The input flange dimensions can be retrieved for each specific motor in Tec Data Finder at www.neugart.com Geometry(2) Centering diameter output shaft Pitch circle diameter output shaft Flange output shaft diameter Centering diameter output flange Flange diameter output Mounting bore output Pitch circle diameter output flange Min. total length Flange thickness output Centering depth output...