PLE Unparalleled: This planetary gearbox maintains its maximum efficiency even at the highest speeds The PLE is perhaps the basis of our success. It is notably light, extremely powerful, yet suitable for complex production cycles due to its low-friction bearing design and optimized lubrication. A genuine powerhouse at an attractive, fair price. Nominal output torque Radial force Axial force Torsional backlash Protection class Frame sizes

Economy Line Coaxial gearbox Equidirectional rotation Spur gear Round type output flange Low-friction deep groove ball bearings High ratio variety i=3 up to i=512 Planet carrier in disc design Detailed explanations of the technical features starting on page 169.

Technical data Code Gearbox characteristics Protection class Standard lubrication Grease (lifetime lubrication) Food grade lubrication Grease (lifetime lubrication) Grease (lifetime lubrication) Installation position Standard backlash Nm /arcmin (lbf.in/ arcmin) Standard surface Running noise(4) Max. bending moment based on the gearbox input flange(5) Output shaft loads Number of stages The ratio-dependent values can be retrieved in Tec Data Finder – www.neugart.com Tmin = -40°C. Optimal operating temperature max. 50°C Sound pressure level from 1 m, measured on input running at n1=3000 rpm no...

Output torques Technical data Ratios (i=n1/n2) Number of stages Application specific configuration with NCP – www.neugart.com Values for feather key (code “A”): for repeated load 30,000 rotations of the output shaft permitted; see page 158

Technical data Output torques Emergency stop torque Average thermal input speed at T2N and S1(4)(5) Input speeds Ratios (i=n1/n2) Number of stages Permitted 1000 times Application-specific speed configurations with NCP – www.neugart.com See page 158 for the definition Average thermal input speed at 50% T2N and S1

Drawing corresponds to a PLE060 / 1-stage / output shaft with feather key / 11 mm clamping system / motor adaptation – one part / B5 flange type motor (1) The dimensions vary with the motor/gearbox flange. The input flange dimensions can be retrieved for each specific motor in Tec Data Finder at www.neugart.com Geometry(2) Pitch circle diameter output Shaft diameter output Shaft collar output Centering diameter output Housing diameter 64.5 (2.539) Centering depth output Shaft length output Motor shaft diameter j6/k6 Clamping system diameter input Output shaft with feather key (DIN 6885-1) Feather...