Catalog excerpts
PFHE Economy Line PFHE The planetary gearbox with flange output shaft for high-load applications The PFHE represents an economically attractive alternative for high-load applications in which high radial loads occur. The combination of special pre-stressed inclined roller bearings and a flanged output shaft in accordance with EN ISO 9409-1 gives the PFHE a very high load capacity. Thanks to the radial shaft seal that is used, this gearbox achieves protection class IP65 at the output side and can therefore also withstand adverse usage conditions. Nominal output torque Radial force Axial force Torsional backlash Protection class Frame sizes
Open the catalog to page 1PFHE Economy Line Economy Line Coaxial gearbox Equidirectional rotation Spur gear Extra large round type output flange Preloaded angular contact roller bearings Rotary shaft seal Flange output shaft (ISO 9409) Planet carrier in disc design Option: Planetary gearbox with mounted pinion on page 140 Detailed explanations of the technical features starting on page 169.
Open the catalog to page 2Technical data Code Gearbox characteristics Tmin Tmax Protection class Standard lubrication Grease (lifetime lubrication) Food grade lubrication Grease (lifetime lubrication) Grease (lifetime lubrication) Nm /arcmin (lbf.in/ arcmin) Standard backlash Standard surface Running noise(4) Max. bending moment based on the gearbox input flange(5) Output shaft loads Moment of inertia Mass moment of inertia(2) Number of stages The ratio-dependent values can be retrieved in Tec Data Finder – www.neugart.com Tmin = -40°C. Optimal operating temperature max. 50°C Sound pressure level from 1 m, measured...
Open the catalog to page 3Technical data Output torques Ratios (i=n1/n2) Number of stages Application specific configuration with NCP – www.neugart.com 30,000 rotations of the output shaft permitted; see page 158
Open the catalog to page 4Technical data Output torques Input speeds Average thermal input speed at T2N and S1(4)(5) Ratios (i=n1/n2) Number of stages Permitted 1000 times Application-specific speed configurations with NCP – www.neugart.com See page 158 for the definition Average thermal input speed at 50% T2N and S1
Open the catalog to page 5Drawing corresponds to a PFHE090 / 1-stage / flange output shaft / 19 mm clamping system / motor adaptation – one part / B5 flange type motor (1) The dimensions vary with the motor/gearbox flange. The input flange dimensions can be retrieved for each specific motor in Tec Data Finder at www.neugart.com Geometry(2) Centering diameter output shaft Pitch circle diameter output shaft Flange output shaft diameter Centering diameter output flange Flange diameter output Mounting bore output Pitch circle diameter output flange Output flange length Motor shaft diameter j6/k6 Clamping system diameter...
Open the catalog to page 6All Neugart GmbH catalogs and technical brochures
-
Precision Gearbox Catalog
174 Pages
-
NCP 4.3
2 Pages
-
Neugart HLAE
12 Pages
-
Neugart NGV
10 Pages
-
Neugart PLHE
8 Pages
-
Neugart WGN
6 Pages
-
Neugart PLFN
6 Pages
-
Neugart WPLN
6 Pages
-
Neugart WPSFN
6 Pages
-
Neugart PSFN
6 Pages
-
Neugart PLN
6 Pages
-
Neugart PSN
6 Pages
-
Neugart PSBN
6 Pages
-
Neugart WPLFE
6 Pages
-
Neugart WPLPE
6 Pages
-
Neugart WPLE
6 Pages
-
Neugart PLFE
6 Pages
-
Neugart PLHE
6 Pages
-
Neugart PLPE
6 Pages
-
Neugart PLQE
6 Pages
-
Neugart WPLQE
6 Pages
-
Neugart PLE
6 Pages
-
NGV
10 Pages