Neugart PFHE
6Pages

{{requestButtons}}

Catalog excerpts

Neugart PFHE - 1

The planetary gearbox with flange output shaft for high-load applications The PFHE represents an economically attractive alternative for high-load applications in which high radial loads occur. The combination of special pre-stressed inclined roller bearings and a flanged output shaft in accordance with EN ISO 9409-1 gives the PFHE a very high load capacity. Thanks to the radial shaft seal that is used, this gearbox achieves protection class IP65 at the output side and can therefore also withstand adverse usage conditions. Nominal output torque Torsional backlash Tilting moment Frame sizes

Open the catalog to page 1
Neugart PFHE - 2

PFHE Economy Line Economy Line Coaxial gearbox Equidirectional rotation Spur gear Extra large round type output flange Preloaded angular contact roller bearings Rotary shaft seal Flange output shaft (ISO 9409) Planet carrier in disc design

Open the catalog to page 2
Neugart PFHE - 3

PFHE Technical data Code Output shaft loads The ratio-dependent values can be retrieved in Tec Data Finder - www.neugart.com Tmin = -40°C. Optimal operating temperature max. 50°C Sound pressure level from 1 m, measured on input running at n1=3000 rpm no load; i=5 Max. motor weight* in kg = 0.2 x Mb / motor length in m * with symmetrically distributed motor weight * with horizontal and stationary mounting These values are based on an output shaft speed of n2=100 rpm Based on the end of the output shaft Other (sometimes higher) values following changes to T2N, Fr, Fa, cycle, and service life...

Open the catalog to page 3
Neugart PFHE - 4

Application specific configuration with NCP - www.neugart.com 30,000 rotations of the output shaft permitted; see page 142

Open the catalog to page 4
Neugart PFHE - 5

PFHE Technical data Output torques Input speeds Average thermal input speed at 50% T2N and S1 Application-specific speed configurations with NCP - www.neugart.com

Open the catalog to page 5
Neugart PFHE - 6

PFHE Dimensions NEUGART PFHE Drawing corresponds to a PFHE090 / 1-stage / flange output shaft / 19 mm clamping system / motor adaptation - one part / B5 flange type motor All other variants can be retrieved in the Tec Data Finder at www.neugart.com (1) Dimensions in mm (2) Number of stages

Open the catalog to page 6

All Neugart GmbH catalogs and technical brochures

  1. Neugart PSFN

    6 Pages

  2. Neugart PLFN

    6 Pages

  3. Neugart PFHE

    6 Pages

  4. Neugart PLN

    6 Pages

  5. Neugart WGN

    6 Pages

  6. Neugart WPLE

    6 Pages

  7. Neugart PSN

    6 Pages

  8. Neugart WPLN

    6 Pages

  9. Neugart PLHE

    6 Pages

  10. Neugart PSBN

    6 Pages

  11. Neugart PSFN

    6 Pages

  12. Neugart PLQE

    6 Pages

  13. Neugart PLHE

    6 Pages

  14. Neugart PLN

    6 Pages

  15. Neugart NGV

    10 Pages

  16. Neugart PLFN

    6 Pages

  17. Neugart WPLN

    6 Pages

  18. Neugart HLAE

    6 Pages

  19. Neugart PLFE

    6 Pages

  20. Neugart PSN

    6 Pages

  21. Neugart PLPE

    6 Pages

  22. Neugart PLE

    6 Pages

  23. NGV

    10 Pages