Neugart NGV


Catalog excerpts

Neugart NGV - 1

The planetary gearbox for AGVs. Compact and highly resilient. OUR GEARBOX SOLUTIONS: AS INDIVIDUAL AS YOUR AGV. + Ideal for high radial loads + Extremely space-saving + Ease of installation + Available in single or multiple units Best price-performance ratio

Open the catalog to page 1
Neugart NGV - 2

The planetary gearbox for AGVs. Whatever the demands that you make of your AGV drive: we can provide you with the ideal gearbox solution for your vehicle. Every detail counts, so that a gearbox can fulfill application-specific requirements in an optimum way. AGVs are designed to transport heavy loads on a continuous basis. The specific structural and mechanical demands are extremely high. However, we fulfill them in a reliable way with our NGV planetary gearboxes. Because the gearboxes impress with their compact design, efficiency and durability, and we have specifically optimized them for...

Open the catalog to page 2
Neugart NGV - 3

Installation configuration of the NGV gearbox with wheel and motor Big ideas, compact size. From a structural point of view, AGVs do not have much room for gearboxes. It is therefore important for them to be very compact. With NGVs, specially developed wheels enclose the gearbox almost completely. In other words, the gearbox is basically outside the vehicle in the wheel, which saves space. If the structural length of the drive train is to be reduced even further, the gearbox can also be installed using so-called direct motor connection. In this case, the sun pinion is attached directly to...

Open the catalog to page 3
Neugart NGV - 4

The planetary gearbox for AGVs. NGV: The perfect gearbox for AGVs. installation space + Direct mounting The mounting interface allows direct mounting of the gearbox to the vehicle. No additional adapters are required. The gearbox is almost completely enclosed by the wheel. The required installation space in the vehicle is therefore reduced to a minimum. + High load capacity The preloaded, double-designed angular contact roller bearings permit very high radial forces. + Motor independent By using different motor adapters it is possible to mount almost any motor. Direct mounting of the motor...

Open the catalog to page 4
Neugart NGV - 5

We supply the NGV gearbox in three sizes, with maximum support loads from 350 kg to 1075 kg per gearbox. For each gearbox size there is a specially developed heavy-duty wheel with a diameter of 160 mm, 200 mm or 250 mm. Maximum speeds of up to 2 m/s (7.2 km/h) are possible. + High load capacity: Angular contact roller bearing with optimized load application point. The 2-stage planetary gearboxes originate from our economy model series, which has been proving itself for decades. This combines the best efficiency, a long service life and high precision of ≤ 12 arcmin with an outstanding...

Open the catalog to page 5
Neugart NGV - 6

NGV gearbox incl. wheel Technical data and dimensions Characteristics (gearbox incl. wheel) Positioning precision Total weight Maximum dynamic load capacity(1) Wheel diameter Min. total length Distance between flange and outer edge Distance between flange and inner edge Technical data Gearbox characteristics Protection class Standard lubrication Grease (lifetime lubrication) Food grade lubrication Grease (lifetime lubrication) Grease (lifetime lubrication) Installation position Standard backlash Nm/arcmin ( Standard surface Running noise(4) Max. bending moment based on the...

Open the catalog to page 6
Neugart NGV - 7

Technical data Output torques Input speeds Max. mechanical input speed(2) Output shaft loads Average thermal input speed at T2N and S1(2) Emergency stop torque Output torques Ratios (i=n1/n2) Ratio-dependent. Application-specific speed configurations with NCP – The ratio-dependent values can be retrieved in Tec Data Finder – Permitted 1000 times These values are based on an output shaft speed of n2=100 rpm Based on the end of the output shaft Other (sometimes higher) values following changes to T2N, Fr, Fa, cycle, and service life of bearing. Application...

Open the catalog to page 7
Neugart NGV - 8

Geometry(1) Centering diameter output shaft Pitch circle diameter output shaft Centering diameter output shaft Centering diameter output flange Flange diameter output Mounting bore output Pitch circle diameter output flange Min. total length Flange thickness output Centering depth output shaft Centering depth output flange Output flange length Clamping system diameter input Motor shaft diameter j6/k6* Permissible motor shaft length Centering diameter input Centering depth input Pitch circle diameter input Motor flange length Diagonal dimension input *The dimensions vary with the...

Open the catalog to page 8
Neugart NGV - 9

Outer diameter of wheel Centering outside diameter Screw connection pitch circle diameter Screw connection head diameter Screw connection diameter Scope of delivery: NGV wheel incl. screws and closure cap Technical data Characteristics NGV wheel Specifications of wheel manufacturer Blickle Weight Mass inertia Roll resistance (2) Friction coefficient (static friction) (3) Floor protection (corresponds to surface pressure of wheel) Temperature range 8.0 (113.786) -30°C (-22°F) to +70°C (+158°F), up to +90°C (+194°F) for short periods. The load-bearing capacity is reduced at ambient...

Open the catalog to page 9
Neugart NGV - 10

Do you have any questions or need further information? We are happy to advise you on all topics relating to drive technology. You can find your personal contact at: Neugart USA Corp. 14325 South Lakes Drive Charlotte, NC 28273 USA Phone: +1 980 299-9800 Fax: +1 980 299-9799 Email: Web: Neugart Planetary Gearboxes (Shenyang) Co., Ltd. No.152, 22nd road E&T Development Zone Shenyang, PC 110143 PR China Phone: +86 24 2537-4959 Fax: +86 24 2537-2552 Email: Web: 69064 NGV product brochure 02.2020 ·...

Open the catalog to page 10

All Neugart GmbH catalogs and technical brochures

  1. NCP 4.3

    2 Pages

  2. Neugart HLAE

    12 Pages

  3. Neugart PLHE

    8 Pages

  4. Neugart WGN

    6 Pages

  5. Neugart PFHE

    6 Pages

  6. Neugart PLFN

    6 Pages

  7. Neugart WPLN

    6 Pages

  8. Neugart PSFN

    6 Pages

  9. Neugart PLN

    6 Pages

  10. Neugart PSN

    6 Pages

  11. Neugart PSBN

    6 Pages

  12. Neugart WPLE

    6 Pages

  13. Neugart PLFE

    6 Pages

  14. Neugart PLHE

    6 Pages

  15. Neugart PLPE

    6 Pages

  16. Neugart PLQE

    6 Pages

  17. Neugart PLE

    6 Pages

  18. NGV

    10 Pages