Extended motor sizing: possible on the basis of the motor characteristics for servo and stepper motors Intuitively enter your own motors Extended motor database (over 19,000 motors) Application-related improvements • • • • • Traction drive: accommodation of the Neugart wheels at the NGV gearbox Winding application: any scattering of torques eliminated Thrust crank: position check corrected (when using more than one segment, incorrect position information may have been displayed, but calculated correctly) Transmission elements and application belts: Standardisation of designations (FV) Rack / Pinion: display of the feed force in the graphic Load import of motor trace files • • Consideration of the mass inertias of motor and gearbox as well as the gearbox losses for a more precise design Selection help when assigning the values to the columns Revised documentation with extended user information, significantly improved readability Increasing the calculation speed, especially with the load filter Sample calculations per application can be loades via Help menu

Improved usability • • • • • • • • • • • • • Start window with simple selection of new or already performed calculations, news are displayed Open files via drag'n drop Up to ten calculations per project file (previously five) Saving the mass inertia calculations in the drive trains even with self-defined cycles Inclusion of the static bearing safety in the graphical calculation results: safer design Load of Lambda in the gearbox database Direct input of the limit values in the load capacity filter The product code in the message area can be used to jump directly to the TDF Value entry simplified...