Together with the fines the spun-off water exits the dryer through the lower discharge port. The NEUE HERBOLD - Dryer type TM 1006 is used for cleaning and surface drying of material, primarily for film flakes, granulat from PET bottles and other rigid types of plastics. The material fraction is fed into the upper hopper, which is located on the end of the dryer housing. The rotor transports the material through the dryer from the inlet side to the outlet port. The rotor and the screen configuration conbined with the rotary speed determine the cleaning efficiency and the residual moisture content of the material. The rotor is dynamically balanced. Roller bearings outside the housing guarantee an efficiant operation of the machine. On request the paddles may be supplied in a screw-on version. . When the material enters the dryer it is accelerated with high speed. Contaminated particles and water escape through the screen perforation. The polygonale screen cage causes a turn over of the material, which leads to a better cleaning and drying result. NEUE HERBOLD Maschinen-u. Anlagenbau GmbH, Wiesenstraße 44, D-74889 Sinsheim-Reihen/Germany Tel. +49/7261/9248-0 Fax +49/7261/9248-97 www.neue-herbold.com E-Mail: [email protected]

Housing with maintenance access door The housing of the mechanical dryer is manufactured in heavy-duty welded design and mounted on anti-vibration pads. Both sides of the housing are equipped with hinged maintenance access doors. The front sides have two openings – the upper opening is for material feed and the lower opening at the opposite side is for material discharge. The lower part of the housing has an opening for water/fines discharge. The machine cover is bolted to a flange on top. Mechanical self cleaning The mechanical self cleaning is done by rubber wipers, which are mounted to two...