Catalogs >
NEU-JKF >
TEST URANINE

TEST URANINE
2Pages

Catalog excerpts

URANIN TESTSSEALING OF MATERIAL The efficiency and the tightness of the equipment are verified and guaranteed by Uranin tests carried out internally or on site. The test consists of : + Measuring a filtering coefficient of the tightness of a filter housing by injecting a solid gas (URANIN) at the inlet of the equipment to be tested, + Take a quantity of gas upstream and downstream of this equipment by means of sampling filters, + Extract URANIN from these filters by washing, + Results reading by measurement of the samples fluorescence. The purification coefficient obtained is the ratio of the mass of the particles to the mass of emerging particles. The test is performed in accordance with standard NF EN ISO 16170. Upstream sampling

Open the catalog to page 1

EQUIPMENT RANGE MED CP Vacuum unit for generating a vacuum in the primary circuit during unit outages CYCLAIR X Type Mobile vacuum unit for performing static/dynamic and direct and indirect dynamic containment tasks MED PZR Mobile vacuum unit for generating a vacuum in the pressuriser. Can also be connected to the MED® CP (generation of a vacuum in the primary circuit) JETLINE KS Dust extractor for fine particles with automatic unclogging by compressed air. Runs continuously and can achieve maximum filtration, particularly when processing fine and radioactive dust. CYLAIR 300 Mobile vacuum...

Open the catalog to page 2

TEST URANINE 2Pages

Catalog excerpts

All NEU-JKF catalogs and technical brochures

TEST URANINE
2Pages