Cobra® is a centrifugal fan designed to the most ventilation configurations: + Pits, tanks, vessels, cellars, premises, process,... Its compact design makes it adaptable to the most various operations of service : + Purification, maintenance, fresh air input and elimination of contaminated air. Its robustness makes it an ideal equipment in the most difficult site conditions: consctruction phases, intervention ... or for its installati on in a manufacturing process: + Solvent shaft ventilation, exhaust gas extraction, hydrocarbon vapor capture, H2S extraction in sewers, wells ... Suitable in a corrosive environment Available in ATEX The manufacturer formally reserves the right to make any modifications it considers suitable to its models.

+ Range of airflows: 500 to 1 700 m3/h. + Specific models for installation in ATEX zone 2/22 (category II3GD and II2GD). + In conformity with standard ErP 2009/125 / EC applicable to fans. + Wide range of accessories: expandable sleeves, heater, filters, grids ... + Available with three-phase asynchronous motor, single-phase, compressed air, 24 VDC. + COBRA®, SUPERCOBRA®, HYPERCOBRA® are centrifugal fans made entirely of ALUMINUM CAST IRON *Depending on the availability of pressure and compressed air flow • The sound levels: measured in free field, 3m from the suction or the unconnected discharge...

Pads assembling and locking with handles Face-to-face positioning and locking by rotation

ACCESSORIES FOR COBRA® WITH NEU COUPLING Expandable sleevel Heater Filter COBRA® 2 Cartridges in series 0 170, NEU coupling Extraction hood 2 directions branch For NEU coupling Y branch (2 directions) - 3 x 0170 Y branch (2 directions) -1 x 0300 - 2 x 0170 NEU coupling Parc d'activites de la Houssoye - Rue Ampere - 59930 La Chapelle d'Armentieres - France Tel. +33 (0)3 20 10 53 66 • Contact : [email protected]