Guarded Hot Plate Series GHP 500, GHP 600, GHP 900 and GHP 900 S Thermal Conductivity Testing Analyzing & Testing

Thermal Conductivity Measuring Devices Protecting the environment, preserving our natural resources and conserving energy have become more and more important. The use of insulation and building materials with a low thermal conductivity value substantially contributes to achieving these goals. These materials help prevent the inside temperature of buildings from approaching the temperature on the outside, thereby minimizing the loss of energy in buildings. As a result, the amount of energy needed to heat or cool the inside of buildings is considerably reduced. The thermal conductivity (lambda,...

“The best energy is the energy that is not needed!" Marcel Huber, Environmental Minister of the German State of Bavaria 2011-2014 Guarded Hot Plate THE ABSOLUTE METHOD FOR DETERMINATION OF THE THERMAL CONDUCTIVITY Direct measuring method For low-conductive and building materials Specimens with high thickness up to 380 mm Customized heating plates Tilting measuring chamber up to 90° Guarded test chamber

GHP 500 – Thermal Conductivity Tester ith Plate w lly t o H d Guarde lay – especia isp ! touch d k specimens c i h t for Measuring device with guarded hot plate in accordance with ISO 8302, ASTM C177, EN 1946-2, EN 12664, EN 12667 and EN 12939 Measuring devices of the GHP 500 series are robust cabinet devices which are especially suited for testing thicker specimens. Thanks to the integrated single board computer (SBC) with Windows operating system, the Lambda software and the high-resolution color touch display, the devices are very user-friendly. Numerous interfaces such as RS232, USB and Gigabit...

Large thermal conductivity measuring range up to 2.0 W/(m·K) – depending on material and thickness Fully insulated guarded test chamber, designed for specimens with a thickness up to 200 mm Available as 1- or 2-specimen measurement method according to ISO 8302 (chapter 1.6.2) Easy specimen change from the front Integrated digital measurement of specimen thickness and sample pressure Motorized lifting of the upper plate Operator guidance via touch display with intuitive guidance through software Network capability Control, data acquisition and data processing via external PC and Lambda software...

GHP 600 – Thermal Conductivity Tester ns up mensio i d n e cim 0 mm For spe m x 60 m 0 0 6 to Measuring device with guarded hot plate in accordance with ISO 8302, ASTM C177, EN 1946-2, EN 12664, EN 12667 and EN 12939 Measuring devices of the GHP 600 series are robust cabinet devices which are especially suited for testing thicker specimens. Thanks to the integrated single board computer (SBC) with Windows operating system, the Lambda software and the high-resolution color touch display, the devices are very user-friendly. Numerous interfaces such as RS232, USB and Gigabit Ethernet enable connectivity...

Large thermal conductivity measurement range up to 2.0 W/(m·K) – depending on material and thickness Fully insulated guarded test chamber, designed for specimens with a thickness up to 200 mm Available as 1- or 2-specimen measurement method according to ISO 8302 (chapter 1.6.2) Easy specimen change from the front Integrated digital measurement of specimen thickness and sample pressure Motorized lifting of the upper plate Operator guidance via touch display with intuitive guidance through software Network capability Control, data acquisition and data processing via external PC and Lambda software...

GHP 900 – Thermal Conductivity Tester pment develo s! & h c r te ea ting pla d to res Tailore stomized hea with cu Measuring device with guarded hot plate in accordance with ISO 8302, ASTM C177, EN 1946-2, EN 12664, EN 12667 and EN 12939 Measuring devices of the GHP 900 series, which are especially designed for thicker specimens with a high gross density, are suitable for a wide range of applications. The design of the device permits samples to be inserted into the test chamber from any side. This allows for the insertion of heavy and complex samples without damaging the measuring plates. Data...

Large thermal conductivity measuring range up to 2.0 W/(m·K) Fully insulated guarded test chamber, designed for specimens with a thickness up to 260 mm Available as 1- or 2-specimen measurement method according to ISO 8302 (chapter 1.6.2) Easy specimen change from any side Integrated digital measurement of specimen thickness and sample pressure Motorized lifting of the upper plate Network capability Control, data acquisition and data processing via external PC and Lambda software Variable dimensions of heating plates; heating area from 200 mm x 200 mm up to 500 mm x 500 mm Square-shaped or rectangular...

GHP 900 S – Thermal Conductivity Tester Thermal conductivity measuring device with guarded hot plate in accordance with ISO 8302, ASTM C177, EN 1946-2, EN 12664, EN 12667, EN 12939 and EN 674 Measuring devices of the GHP 900 S series are cabinet devices with a tiltable test chamber that are well suited for a wide range of applications, those involving especially thicker specimens and insulating glass. The design of the device is such that specimens are inserted into the test chamber from the top. This allows for the insertion of heavy and complex samples without damaging the measuring plates....

Large thermal conductivity measuring range up to 2.0 W/(m·K) Fully insulated guarded test chamber, designed for specimens with a thickness up to 380 mm Available as 1- or 2-speciment measurement method according to ISO 8302 (chapter 1.6.2) Easy specimen change from the top Fixation of specimens onto the measurement positioning surface Electrically operated tilting mechanism for the test chamber Tiltable – especially important for skylights Tilting angle indicator (0 to 90°) on LCD display Control, data acquisition and data processing via external PC and Lambda software Variable dimensions of...