Group: NETZSCH
Catalog excerpts
Fire Testing Systems Instrumentation and Methods for Investigating the Fire Behavior of Products and Materials Analyzing & Testing
Open the catalog to page 1Heat release Smoke development Flame spread Flaming droplets Burning time/ speed Mass loss
Open the catalog to page 2Fire Testing Systems For Investigating Nearly Any Kind of Material Preventive fire protection serves to safeguard life and limb, the environment and public safety. It involves regulations designed to prevent the development and spread of fire so that fire hazards do not occur in the first place. Therefore, devices and systems for testing the fire behavior of products have been increasing in importance in recent times. For reasons of safety and in accordance with legal regulations, it is essential that products and materials are as flame-retardant as possible. At the same time, it is equally...
Open the catalog to page 3Fire Testing Prevents Firefighting IN ACCORDANCE WITH EURO CLASSIFICATION DIN EN 13501 (A1 to F) Preventive Fire Protection d on an rmati t: nfo duct i nd a ed pro can be fou tail De sting res fire-te rochu / b ch.com .netzs www In order to prevent fires or keep them from spreading, it is essential to choose materials and components appropriately. The basis for such decisions are fire tests in accordance with national, regional and international standards used to classify the flammability and burn rate of materials for the construction, textile, automobile and electrical industries....
Open the catalog to page 4Mobility Tests in the field of mobility focus on the flammability and flame spread rate of materials that are used for the interior of vehicles. Such materials include those used to produce the interior lining and trim, seats and floor coverings of aviation vehicles, railed vehicles, road vehicles and ships. Electrical Industry/Cable Reactions to fire – especially issues such as flame spread and flaming droplets for electronic and electrical parts, smoke density, insulation integrity and the formation of corrosive gases upon flame impact for electrical, control and data cables – form the...
Open the catalog to page 5KBT 916 – Fire Testing Systems for Cables Fire Testing System for Measuring the Heat Release, Smoke Production and Smoke Density During Flame Spread Tests on Vertically Mounted Bunched Cables and Insulated Wires in Accordance with EN 50399 and IEC 60332-3-10 Cables and lines are essential for our day-to-day use of electricity and energy. To achieve maximum safety and the best possible fire protection, it is important to have precise knowledge about their fire behavior. The KBT 916 fire testing device determines the heat release and smoke production and helps classify cables into the correct...
Open the catalog to page 6SBI 915 – Single Burning Item Fire Testing System for Determining the Reaction of Building Products to Fire When Exposed to Thermal Attack by a Single Burning Item in Accordance with EN 13823 To assess the fire behavior of building products, the SBI 915 simulates the start of a fire. The results of the SBI test are used to classify the building product (Euroclass). By means of the SBI 915, building products can be measured according to CPR (Construction Products Regulation), with the exception of a few product groups like floorings and cables. The test unit consists of a test chamber, the...
Open the catalog to page 7TBB 913 – Flooring Radiant Panel Tester Test System for the Reaction of Floorings to Fire in Accordance with EN ISO 9239-1 (Propane Burner) and EN 13501-1, Based on ASTM E648 (Methane Burner) The fire test in accordance with EN 13501-1 has been mandatory for the approval of flooring products in European countries for several years now. The American standard is very similar to the European standard, but is based on a methane burner. All types of flooring products, e.g., carpets, wood, cork and plastic coverings, can be tested. The TBB 913 is used to simulate the probable degree of stress...
Open the catalog to page 8TNB 912 – Non-Combustibility Test Device Fire Testing Device for Non-Combustibility Tests on Building Products with Electrical Tube in Accordance with DIN EN ISO 1182 The TNB test identifies which building products contribute very little, if at all, to the progression of a fire. Based on these results, the appropriate building product for a structure can be selected. Testing of non-combustibility serves for classification into the European fire classes A1 and A2. BUILDING MATERIALS The "TNB measuring and control unit" – with its integrated Single Board Computer with Windows operating...
Open the catalog to page 9KBK 917 – Small Burner Box Fire Testing System for Determining the Ignitability of Building Products Subjected to Direct Impingement of Flame – Part 2: Single-Flame Source Test in Accordance with DIN EN ISO 11925-2 for Classification into Euroclasses B, C, D and E The DIN EN ISO 11925-2 standard specifies a test method for determining the flammability of products in a vertical arrangement, applying a small flame directly and without additional heat irradiation. By means of additional accessories, the KBK can also be used for tests in accordance with DIN 4102-1. During a test in the small...
Open the catalog to page 10TCC 918 – Cone Calorimeter Fire Testing System for Determining the Heat Release Rate, Dynamic Smoke Production and Mass-Loss Rate of Materials and Products According to the Oxygen Consumption Principle in Accordance with ISO 5660-1 The amount of heat produced by a material is directly related to the severity of of a fire, expressed, for example, by its rate of spread. To test the flammability of a material, it is exposed to an external radiant heat coure during testing in the Cone Calorimeter. TCC 918 Tests – Data Source for Predicting Real-Time Fire Behavior Ignition Time (TOI) Time of...
Open the catalog to page 11TDP T4 – Fire Testing Device for Roofs For Determining the Performance of Roofs When Exposed to External Fire – Test 4 in Two Stages Incorporating Incendiary Devices, Wind and Supplementary Radiant Heat in Accordance with DIN CEN/TS 1187 Information Obtained by TDP T4 Flame spread on the roof surface Burnt length Burning/falling droplets Penetration of burning/glowing parts through the roof stucture Glowing behavior of the roofing Formation of holes in the roofing Radius of fire spread on flat roofs For the building industry, fire behavior including flammability and flame spread is of major...
Open the catalog to page 12All NETZSCH Analyzing & Testing catalogs and technical brochures
-
TG 309 Libra Series
24 Pages
-
STA 449 F5 Jupiter®
16 Pages
-
DMA 303 Eplexor
24 Pages
-
ARC® 244 ARC® 254
1 Pages
-
HMOR 422
1 Pages
-
RUL/CIC 421
1 Pages
-
Product Overview
12 Pages
-
Kinexus Prime DSR Series
20 Pages
-
DIL 402 Expedis Select/Supreme
28 Pages
-
Rosand Series
20 Pages
-
Kinexus Prime Series
20 Pages
-
Advanced Materials Testing
32 Pages
-
NTA Guarded Hot Plate Series
16 Pages
-
Cone Calorimeter TCC 918
12 Pages
-
Photo-DSC 204 F1 Phoenix®
8 Pages
-
TMA 402 F1/F3 Hyperion®
16 Pages
-
NTA HotBoxes Test Chambers
16 Pages
-
Thermal Insulation Materials
24 Pages
-
TA-QMS Coupling
16 Pages
-
STA 2500 Regulus
12 Pages
-
SBA 458 Nemesis®
24 Pages
-
NTA HotBoxes
16 Pages
-
NETZSCH NEVIO Instrument Series
24 Pages
-
LFA 467 HyperFlash® Series
28 Pages
-
LFA 427 - product brochure
24 Pages
-
Kinetics NEO
16 Pages
-
TG-FTIR - product brochure
24 Pages
-
DMA GABO EPLEXOR up to 1500°C
12 Pages
-
DMA GABO DiPLEXOR
8 Pages
-
DIL 402 Expedis Classic
16 Pages
-
DEA 288 Ionic
20 Pages
-
Accelerating Rate Calorimetry
20 Pages
-
GABO DiPLEXOR®
8 Pages
-
GABOMETER®
8 Pages