*mydirectindustry

HMOR 422

Product catalog summary

Technical Specifications Overview

This document outlines the technical specifications for two models: HMOR 422 D/3 and HMOR 422 E/4. The specifications are subject to change.

1. Bending Mode

HMOR 422 D/3: 3-point bending mode
HMOR 422 E/4: 4-point bending mode

2. Temperature Range

HMOR 422 D/3: Room Temperature (RT) to 1500°C
HMOR 422 E/4: RT to 1450°C

3. Furnace Specifications

Both models feature a chamber furnace with a pre-heating zone and a swing-open furnace.

4. Thermocouples

Type S thermocouples are used in both models.

5. Mode of Operation

HMOR 422 D/3: Continuous operation
HMOR 422 E/4: Single measurement operation

6. Test Piece Dimensions

HMOR 422 D/3: 150 mm x 25 mm x 25 mm
HMOR 422 E/4: 45 mm x 4.5 mm x 3.5 mm

7. Support and Bending Edges

HMOR 422 D/3: 125 mm between support edges
HMOR 422 E/4: 40 mm between support edges, 20 mm between 4-point bending edges

8. Loading Device

Both models use a weighing lever with a load range of 0 to 5000 N and four load rates (2, 4.2, 8, 12 N/s).

9. Measurement Deformation

HMOR 422 D/3: Inductive system with optional reference rod
HMOR 422 E/4: Standard differential measuring system

10. Measuring Range and Resolution

HMOR 422 D/3: Max. 10 mm, 2.5 nm resolution
HMOR 422 E/4: Max. 5 mm, 1.25 nm resolution

11. Deformation Rate

HMOR 422 D/3: Optional constant deformation rate, load rate 10 to 2000 μm/min
HMOR 422 E/4: Not applicable

12. Electrical Supply

Furnace: HMOR 422 D/3 requires 3 x 400 V/N/PE, 50/60 Hz; HMOR 422 E/4 requires 230 V, 50/60 Hz
Electronics: Both models require 230 V/10 A, 50/60 Hz

13. Dimensions and Weight

HMOR 422 D/3: Measuring unit 2200 x 1800 x 870 mm, 540 kg; Control unit 1120 x 565 x 452 mm, 250 kg
HMOR 422 E/4: Measuring unit 2100 x 1600 x 750 mm, 430 kg; Control unit 1120 x 565 x 452 mm, 250 kg

Catalog excerpts

Technical Specifications HMOR 422 D/3 Bending mode Temperature range Chamber furnace with pre-heating zone Swing-open furnace Single measurement Test piece dimensions Distance between support edges Distance between 4-point bending edges Loading device with movable weight Inductive system with reference rod (optional) Differential measuring system (standard) Measuring range Digital resolution Constant deformation rate Load rate Electrical supply furnace Electrical supply electronics Measuring unit dimensions NGB · 0718 · Technical specifications are subject to change. Measurement deformation Control unit dimensions

Open the catalog to page 1

All NETZSCH Analyzing & Testing catalogs and technical brochures

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list